Trx with an Rsv Mille back end fettle !

[ekoja]

You just gotta love these build threads.

[Yoozy]

Got the carbs sorted last night and the loom lashed on and all connected up round the front. If I wasn't going away for a few days today it would possibly be in a state to fire up. In a mocked up, lashed up kind of state
Gotta stay calm and not rush things

[Yoozy]

SHE LIVES Minor problem with having the coils the wrong way round, but thanks to MonseiurDimwiddyfookingenius she boooooooms like a guddun
Tiny coolant leak on that big silver bugger on the rocker to sort and the homeward stretch is upon me She's looking rather frikkin nice annall
Fingers crossed by the end of the week and its fandabyfoorkindozy

[misterdimwiddy]

The coolant pipe can be a bit of an arse.

Reassembled mine not long ago with a new O-ring and it still leaked (but then sorted itself out).

The head (and the pipe) get badly corroded within the pocket where the seal sits and the seal surfaces become pitted.

A dollop of Yamabond sealant with a new seal should be good.

[Yoozy]

That's the fella, about 1" diameter. Seems to have cut itself when pressing the pipe in. Easy enough to mend

[Yoozy]

Got a load of wiring and plumbing to hide behind the battery and its bothering me. I knocked these panels up but can't make me mind up. Opinions please,,

1 plain shiney



2 trial fit carbony wrap




Them can hangers are coming off btw

[coxylaad]

I did this sort of thing:


obviously my back end is completely different to yours but its a similar type of affair.
I would pull them out a bit so they are not recessed on the inside of the tubes.

[schmiffee]

I would pull them out a bit so they are not recessed on the inside of the tubes.

Oh see, I would prefer them where they are on the inside...let a little more of the frame SHINE!!

[bubbaad]

Yeah.....Frame showing for me but not the shiny black. Maybe something that contrasts with the frame a little. Bike's coming along well mate, looking forward to seeing it finished

[Yoozy]

Carbon it is boys. Headlight, winkers and horn all nailed on and wired up tonight. Just gotta get some clocks on and we're off

[Yoozy]

Been down our road on it, nothing fell off or blew up Steering needs whipping up a tad, other than that Not sure ont theadleet though. I'll wash it and take a few more piccies tomorrow.





Got a couple of little jobs to do yet,,and I seriously pissed off with the headers

[zednine]

Well I like it .......... nice build and summat looking smart at the end ........ well done mate

[sadmansteve]

You need to sort those throttle cables! how long are they? Invert the cable housing or use an R6 2CO housing and have the cables exit under the handle bar, it will look neater than them stuck up in the air. By doing this they also take a shorter route and you don't need extended cables.

[Yoozy]

Eye, that's on the list along with some black brake lines. Other than that it's ok then

[dixonj]

Job sorted, maybe have to try for another meet up.