Thought it about time I said hello as I joined some months ago and, while I've been 'on' a couple of times - mooching about - I'm only now getting round to fettling the TRX I bought from a friend-of-a-friend toward the end of last year.
The bike has YZF750 front and rear end with a 600 tail unit. At the moment it's fully stripped and the frame, swingarm, wheels etc have been powder coated. Although I've yet to paint the engine (next job) I am starting the rebuild (can't wait!) and cannot for the life of me find the torque settings for the four frame bolts that attach the engine bracket (as I believe it is called) that carries the swing arm. I was simply wondering if anyone can help as I'm buggered if I can find it in either the Haynes manual or the parts manual (that has a list of torque settings) and keep going through them in a state of total denial! Something of a hindrance to progress....
Grateful for any direction/ information anyone can provide.
Cheers, Johnners
Hi guys
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
johnners987
- Site Sponsor
- Posts: 55
- Joined: Tue Apr 23, 2013 3:54 pm
- Location: NW England
Hi guys
......the louder you scream, the faster we go .......
-
Yoozy
- Site Sponsor
- Posts: 534
- Joined: Sun Dec 16, 2012 4:06 pm
- Location: NOBville Manchester.
Re: Hi guys
Ey up. I just whipped mine up to within one grunt.
-
sanddune51
- Site Sponsor
- Posts: 399
- Joined: Sun Oct 11, 2009 6:07 am
- Location: Kent, UK.
Re: Hi guys
If you know the bolt diameter and thread pitch, a look online will fine you a generic torque figure that will be in the ball park.
Mark.
Mark.
-
johnners987
- Site Sponsor
- Posts: 55
- Joined: Tue Apr 23, 2013 3:54 pm
- Location: NW England
Re: Hi guys
Thanks guys. Just realized I posted as a new member in the wrong section - doh!
......the louder you scream, the faster we go .......
-
Stu99
- Site Sponsor
- Posts: 774
- Joined: Wed Jul 08, 2009 12:23 am
- Location: Melbourne Vic
Re: Hi guys
Johnners,
See page 30 of TRX parts catalogue. Ref #2. Part # 4NX-21430-00. Rear arm bracket comp.
See page 2-13 of TRX service manual. Frame and Rear arm bracket. 55nm.
These two M10 bolts in frame.
See page 30 of TRX parts catalogue. Ref #2. Part # 4NX-21430-00. Rear arm bracket comp.
See page 2-13 of TRX service manual. Frame and Rear arm bracket. 55nm.
These two M10 bolts in frame.
You do not have the required permissions to view the files attached to this post.
It must be true, I read it on the internet.
-
johnners987
- Site Sponsor
- Posts: 55
- Joined: Tue Apr 23, 2013 3:54 pm
- Location: NW England
Re: Hi guys
Thanks Stu. Bang on the money. Clearly I can't see the wood for trees as I've checked your references and they are indeed there!Stu99 wrote:Johnners,
See page 30 of TRX parts catalogue. Ref #2. Part # 4NX-21430-00. Rear arm bracket comp.
See page 2-13 of TRX service manual. Frame and Rear arm bracket. 55nm.
These two M10 bolts in frame.
Thanks again.
......the louder you scream, the faster we go .......
-
Stu99
- Site Sponsor
- Posts: 774
- Joined: Wed Jul 08, 2009 12:23 am
- Location: Melbourne Vic
Re: Hi guys
No worries Johnners,
Happy to help.
Wack up some pics as you build, we like to see 'em going together
Happy to help.
Wack up some pics as you build, we like to see 'em going together
It must be true, I read it on the internet.
-
johnners987
- Site Sponsor
- Posts: 55
- Joined: Tue Apr 23, 2013 3:54 pm
- Location: NW England
Re: Hi guys
Will do. I'm taking the bodywork to my painter next week. He did a cracking job on my R1 doing an Yamaha Japan M1 race rep scheme. The TRX is going to be in Marlboro endurance colours. Hopefully I will get the engine painted and the rebuild completed before he gets the painting done (yeah right)! 
......the louder you scream, the faster we go .......