Started this today
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
bubbaad
- Site Sponsor
- Posts: 369
- Joined: Tue Mar 13, 2012 8:41 pm
- Location: Manchester UK
Started this today
It's getting fiddly now.....
You do not have the required permissions to view the files attached to this post.
-
Tarwetijger
- TRX-Enthusiast
- Posts: 1537
- Joined: Tue May 15, 2007 9:31 am
- Location: Netherlands, Assen
- Contact:
Re: Started this today
Err, what happens next?! 
-
alextrx850
- Site Sponsor
- Posts: 2149
- Joined: Sat Apr 02, 2011 10:36 pm
- Location: brisbane AUSTRALIA
Re: Started this today
Ah, ok....a clear cover, interesting to the how it will be fixed in place and sealed.Tarwetijger wrote:Err, what happens next?!
Clear pyrex, or a clear cooking pot lid would do...handle optional
-
bubbaad
- Site Sponsor
- Posts: 369
- Joined: Tue Mar 13, 2012 8:41 pm
- Location: Manchester UK
Re: Started this today
Was thinking mdf and gaffer tape
-
handsomejackuk
- TRX-Enthusiast
- Posts: 695
- Joined: Thu Jul 03, 2008 8:03 am
Re: Started this today
WHY ?
-
handsomejackuk
- TRX-Enthusiast
- Posts: 695
- Joined: Thu Jul 03, 2008 8:03 am
Re: Started this today
hello Mr clutch pushrod why have you fallen out...? ohhh because someone cut away all my supporting material... 
-
bubbaad
- Site Sponsor
- Posts: 369
- Joined: Tue Mar 13, 2012 8:41 pm
- Location: Manchester UK
Re: Started this today
Why do anything ?
-
alextrx850
- Site Sponsor
- Posts: 2149
- Joined: Sat Apr 02, 2011 10:36 pm
- Location: brisbane AUSTRALIA
Re: Started this today
How does the outer plastic pjate cone off.?.i need to spray mine.
-
Con Rod
- Site Sponsor
- Posts: 1126
- Joined: Wed Nov 16, 2011 11:48 pm
- Location: Sydney, Australia
Re: Started this today
alextrx850 wrote:How does the outer plastic pjate cone off.?.i need to spray mine.
just 2 screw behind the alternator windings from memory
Paul
-
bubbaad
- Site Sponsor
- Posts: 369
- Joined: Tue Mar 13, 2012 8:41 pm
- Location: Manchester UK
Re: Started this today
You're memory serves you well....... 
-
alextrx850
- Site Sponsor
- Posts: 2149
- Joined: Sat Apr 02, 2011 10:36 pm
- Location: brisbane AUSTRALIA
Re: Started this today
Guessing the two offset holes on the inside photo has the screw lugs for the outer yamaha dish....on the clutch cover.Con Rod wrote:alextrx850 wrote:How does the outer plastic pjate cone off.?.i need to spray mine.
just 2 screw behind the alternator windings from memory
-
bubbaad
- Site Sponsor
- Posts: 369
- Joined: Tue Mar 13, 2012 8:41 pm
- Location: Manchester UK
Re: Started this today
That's right. I'm going to drill for a further two bolts and hopefully with some suitable sealant it wont leak.............. 
-
Rod.s
- Site Sponsor
- Posts: 1404
- Joined: Sun Apr 25, 2010 11:01 am
- Location: Brisbane, Australia
Re: Started this today
Yep the ribs take compressive loads, the flats, lateral load, it won't fail straight away...... Once it gets covered in oil it'll look decisively average, but hey it's not my bike so go crazy manhandsomejackuk wrote:hello Mr clutch pushrod why have you fallen out...? ohhh because someone cut away all my supporting material...
and remember to always enjoy the ride If it's not made in China, it's a fake!