speedo
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
radman
- TRX-Enthusiast
- Posts: 23
- Joined: Thu Aug 25, 2011 9:54 pm
speedo
i have fitted an mph speedo in place of the metric one on my bike, when i got the bike nearly finished i was checking the wiring and noticed, that when i switched the ignition on, the seedo needle swept around the face of the clock. i have never noticed this before, is it right or have i done something wrong
-
fung
- Site Sponsor
- Posts: 1605
- Joined: Mon Aug 23, 2010 2:00 am
- Location: Gold Coast. South East Queensland.
Re: speedo
the tacho on my TDM 9er does that, but the two TRX don't tho.
cheers
fung
cheers
fung
Last edited by fung on Tue Jan 29, 2013 1:12 am, edited 1 time in total.
I WOULD RATHER WEAR OUT THAN RUST
-
Con Rod
- Site Sponsor
- Posts: 1126
- Joined: Wed Nov 16, 2011 11:48 pm
- Location: Sydney, Australia
Re: speedo
I see how the RPM could swipe on start up but I dont believe the speedo could as it is driven by the speedo gear
Paul
-
Skybone
- Site Sponsor
- Posts: 270
- Joined: Mon Jul 09, 2012 3:18 pm
- Location: Scottish Highlands
Re: speedo
Did you replace the old clocks with standard TRX clocks or an aftermarket set?
I replaced the KPH clocks with a set of standard MPH clocks not long after getting the bike, and haven't had any issues. Did you have to mess with any of the wiring/connectors?
I replaced the KPH clocks with a set of standard MPH clocks not long after getting the bike, and haven't had any issues. Did you have to mess with any of the wiring/connectors?
-
radman
- TRX-Enthusiast
- Posts: 23
- Joined: Thu Aug 25, 2011 9:54 pm
Re: speedo
sorry guys i made a stupid mistake, its not the speedo its the tacho, before anyone says its an easy mistake to make it isnt, if anyone sees me at squires bar feel free to kick me in the bo--ocks, what a prat, thanks guys