Please share your secrets! What mods have you made to your TRX?
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
fung
- Site Sponsor
- Posts: 1605
- Joined: Mon Aug 23, 2010 2:00 am
- Location: Gold Coast. South East Queensland.
Post
by fung » Fri Nov 09, 2012 11:41 pm
Dan 850 wrote:We have a set of good blue spots for grabs, with pads and brake lines to fit an r6, maybe fit trx unsure. Calipers definitely will. £60 + post or near offer,
Just noticed your in aus so with post probs won't be worth it.
90 quid for blues, pads and lines (as R6 will suit ) is not a bad deal.
try to buy them separately inc post for less.
just sayin
cheers
fung
I WOULD RATHER WEAR OUT THAN RUST
-
Thumper
- TRX-Enthusiast
- Posts: 11
- Joined: Sat Oct 27, 2012 6:19 am
- Location: Adelaide, Australia
Post
by Thumper » Sat Nov 10, 2012 7:38 pm
Dan 850 wrote:Says postage is about £30 from a quick quote I did, will make them rather pricey.
hey mate...for 90 quid all up, is not bad, doesn't work out to be much more than I paid for my local set of radials lol...moving house this week, so will get back to you in the next week or two to see if you still have them. thanks
-
ritza
- TRX-Enthusiast
- Posts: 88
- Joined: Tue Oct 05, 2010 12:03 am
- Location: perth western australia
Post
by ritza » Sun Nov 11, 2012 12:38 am
pm me i have a spare set of bluespots...in perth oz (the real one)
....mike
-
dfh
- TRX-Enthusiast
- Posts: 287
- Joined: Sat Nov 04, 2006 1:39 am
- Location: Adelaide South Australia.
Post
by dfh » Wed Nov 14, 2012 3:52 am
ritza wrote:pm me i have a spare set of bluespots...in perth oz (the real one)
....mike
Could well be interested in them myself if Thumper is not. Got the master cylinder to suit?
Now with 140,000 on the clocks, X-mas tree didn't kill it & I still love it.
-
Poida
- TRX-Enthusiast
- Posts: 12
- Joined: Sun Jul 18, 2010 1:51 pm
- Location: Sydney
Post
by Poida » Wed Nov 14, 2012 4:36 am
I'm in Sydney and rang around a few wreckers and picked a set up for $120.
They did need a clean (brake dust), but they were fine straight on. Even came with a set pads that were left in there.
I still put a seal kit and new pads/discs in.
I would be inclined to ring around.
-
mrdesmo
- TRX-Enthusiast
- Posts: 34
- Joined: Thu Jul 01, 2010 3:18 pm
- Location: Hahndorf Adelaide Hills South Australia
Post
by mrdesmo » Sun Nov 25, 2012 11:52 am
Have you tried the wreckers in Adelaide?
I got mine from the mob on Churchill Rd, no problems at all, braided lines from HEL to suit from QLD, original master cylinder. She STOPS real well now!!
-
Thumper
- TRX-Enthusiast
- Posts: 11
- Joined: Sat Oct 27, 2012 6:19 am
- Location: Adelaide, Australia
Post
by Thumper » Mon Nov 26, 2012 9:31 am
Haven't tried any local wreckers so far...eBay is always my first port of call...moved house last weekend...still got rubbish everywhere...so will sell the radial gold spots online or something, try get my money back before I look for another set to suit the TRX. The mob on Churchill Rd? I presume you're talking about that Japanese motorcycle wreckers place near the BP...Grand Junction Rd end?
-
mrdesmo
- TRX-Enthusiast
- Posts: 34
- Joined: Thu Jul 01, 2010 3:18 pm
- Location: Hahndorf Adelaide Hills South Australia
Post
by mrdesmo » Thu Nov 29, 2012 8:48 am
Thats the one, also try Show and Go. 236 Brighton Road Somerton Park. I've picked up TRX bits from there as well
