Big bore headers available soon

[drmac]

Kayla


I will be up for a set of 2 -1 pipes (saves me trying to make them ) , can you give me a shout when you need payment.



Cheers

Steve

[SDN]

Sounds good to me hand made headerss in good grade stainless right side 0f £400 - count me in for one last time a set of 2 into1 into 2's

[Kayla]

Right, all I need to do now is arrange to collect the rolling chassis after the new year and I'll get it moving. Thanks for all of your input

[Kayla]

I've got the TRX booked in for the 7th and 8th of February to have both types of headers made, as long as I can still get the rolling chassis I was going to borrow.

[highlander]

Hi Kayla, I'm in for a two into one. Graeme.

[Kayla]

Sorry to bump this again, but with the date looming (7th Feb) to take the TRX in to have the systems made, can I have as near a definite show of hands for these please? I've had a couple of PMs from people who don't want them any more is all.

[SDN]

Hi Kayla, can you give us ball park price - am definately interested, but cost must be realistic as the over system is available for 1000euros

[Kayla]

Hi Kayla, can you give us ball park price - am definately interested, but cost must be realistic as the over system is available for 1000euros

A ball park, ball park price (ie not a definite ball park, a vague ball park!) is £275-£300 for the 2-1 and £375-£400 for the 2-1-2. This price is without cans and is subject to change once I have a proper price which I'll know for sure when I take the bike up, but budget around those figures.

Even factoring the cost of new cans if you wanted (but I assumed most would have a pair of 50mm cans they're already using), that's a realistic price for a hand made in the UK, TIG welded stainless system.

[drix]

Hi Kayla, can you give us ball park price - am definately interested, but cost must be realistic as the over system is available for 1000euros

A ball park, ball park price (ie not a definite ball park, a vague ball park!) is £275-£300 for the 2-1 and £375-£400 for the 2-1-2. This price is without cans and is subject to change once I have a proper price which I'll know for sure when I take the bike up, but budget around those figures.

Even factoring the cost of new cans if you wanted (but I assumed most would have a pair of 50mm cans they're already using), that's a realistic price for a hand made in the UK, TIG welded stainless system.

Hey Kayla

For circ that budget above, I'm in for a 2-1-2.

Obv, if the price ends up being close to a MAB or OVER system, then there is little point going ahead. (just making sure we all have the same common sense )

Thanks for arranging that and making it happen Kayla!

[Kayla]

Hey Kayla

For circ that budget above, I'm in for a 2-1-2.

Obv, if the price ends up being close to a MAB or OVER system, then there is little point going ahead. (just making sure we all have the same common sense )

Thanks for arranging that and making it happen Kayla!

Thanks, and yes, I have the same common sense The SZR660 system is very similar to the TRX 2-1 so I can't see there being too much difference in the price, it's the 2-1-2 collector that will cost because it's not 'simply' a case of bending a few tubes and welding them up- if I'm too far out on the estimate I'll get them to make a 2-1 up first and get back here with a definite price for the 2-1-2 before they go ahead.

[drix]

Hey Kayla

For circ that budget above, I'm in for a 2-1-2.

Obv, if the price ends up being close to a MAB or OVER system, then there is little point going ahead. (just making sure we all have the same common sense )

Thanks for arranging that and making it happen Kayla!

Thanks, and yes, I have the same common sense The SZR660 system is very similar to the TRX 2-1 so I can't see there being too much difference in the price, it's the 2-1-2 collector that will cost because it's not 'simply' a case of bending a few tubes and welding them up- if I'm too far out on the estimate I'll get them to make a 2-1 up first and get back here with a definite price for the 2-1-2 before they go ahead.

The approach sounds good to me RE 2-1-2. A 2-1 it will be otherwise, still better than standard pipes!

[andyaber]

Hi Kayla

I'm up for a 2-1 at that sort of price.

Cheers, Andy.

[drmac]

Hi Kayla


Im still in for a 2 in 1 system



Cheers
Steve

[markrennie]

Hi Kayla,
i'm new to this site and havent introduced myself yet. i was wandering what was happening with the headers? i have a bike which has been converted to a barely road legal track bike with lovely new fcr's and would like some fat headers to help out the flow. i would be happy to go for what ever everyone else is going for, please let me know what the score is.

[markrennie]

oh and i have the yzf swingarm conversion which is fouling my beowulf link pipes whilst having the rear jacked up around 40mm. so will the link pipes be able to clear this problem.

cheers
mark