Jetting- Standfard Carbs, K +N, pipes?

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
CH_R1
Former Member
Posts: 29
Joined: Mon Jan 11, 2010 2:59 am
Location: UK

Jetting- Standfard Carbs, K +N, pipes?

Post by CH_R1 » Sat Mar 06, 2010 12:18 pm

Hi folks

Just wondering if bigger main jets are needed when switching to a K+N filter? My pipes are free flowing Leo Vince SBKs and carbs are standard CVs. I've read that the jetting is overly rich on stock pipes so should be fine with the pipes but not sure about adding the K+N? Given that it's such a pain getting to the plugs, I'd rather not have to start doing plug chops...Anyone got experience of using a K+N, free-flowing pipes and stock carbs/jetting? Don't want to be running too lean but if it's way rich as standard mabe I'll be OK?! (Also: this has got to be one of the coolest running engines I've seen- Reckon it hardly needs the water cooling here in Blighty!) Thanks in advance.

cobbadiggabuddyblooo
Site Sponsor
Posts: 6809
Joined: Thu Aug 28, 2008 9:19 am
Location: Brisbane,Australia

Re: Jetting- Standfard Carbs, K +N, pipes?

Post by cobbadiggabuddyblooo » Sat Mar 06, 2010 12:33 pm

NICE ONE A KATANA 1100 WHAT A STYLISH STEP IN TO THE FUTURE THEY WHERE FOR THEIR TIME =D> =D>
laughter is the best medicine

CH_R1
Former Member
Posts: 29
Joined: Mon Jan 11, 2010 2:59 am
Location: UK

Re: Jetting- Standfard Carbs, K +N, pipes?

Post by CH_R1 » Sat Mar 06, 2010 1:05 pm

Cheers. Braking and handling are nothing short of scary by TRX standards but I love it. Like the TRX it was only made for a few years so you won't see many about and with a few mods they just about stop and go round corners! [-o<

User avatar
slow codger
Site Sponsor
Posts: 2699
Joined: Sun Oct 01, 2006 9:35 pm
Location: The Fens

Re: Jetting- Standfard Carbs, K +N, pipes?

Post by slow codger » Sat Mar 06, 2010 1:30 pm

:D I run carbon race Microns with a K&N no probs at all. Have to put the original heavyweights on for the MOT and still runs fine.

Dave E
An infiltrator from the dark side!

User avatar
Kayla
Site Sponsor
Posts: 1670
Joined: Fri Jul 04, 2008 7:49 am
Location: County Durham

Re: Jetting- Standfard Carbs, K +N, pipes?

Post by Kayla » Sat Mar 06, 2010 4:29 pm

Mine was still running rich with open pipes and a hacked about airbox on standard jetting :shock: FCRs cured that though :wink:
Image

Just because you're breathing, it doesn't mean you're alive.

CH_R1
Former Member
Posts: 29
Joined: Mon Jan 11, 2010 2:59 am
Location: UK

Re: Jetting- Standfard Carbs, K +N, pipes?

Post by CH_R1 » Sat Mar 06, 2010 9:34 pm

K+N it is then! I know it sounds lazy but I'd rather not have to start swapping jets right now- having too much fun scooting about on the bike now the roads are drying out! (Holed a piston years ago thru running too lean so thought I'd better ask.) As to FCRs- for the moment I'll just have to gaze longingly at pics on the web and hope my numbers come up in the lotto!! (ditto for an Ohlins shock)
Cheers for the info! :)

User avatar
phuk72
Site Sponsor / Administrator
Posts: 3522
Joined: Thu Jan 06, 2005 1:47 pm

Re: Jetting- Standfard Carbs, K +N, pipes?

Post by phuk72 » Sun Mar 07, 2010 2:17 pm

IME, a set of end cans and a free flowing filter require no jetting changes
Image

bevie
TRX-Enthusiast
Posts: 81
Joined: Wed Sep 27, 2006 10:08 am
Location: Central Scotland

Re: Jetting- Standfard Carbs, K +N, pipes?

Post by bevie » Mon Mar 22, 2010 2:26 pm

Hi,
been running free flowing pipes ,K&N filter,factory pro needle jet,dyna jet needle for about four years now no probs at all, you ever up the west coast ?

CH_R1
Former Member
Posts: 29
Joined: Mon Jan 11, 2010 2:59 am
Location: UK

Re: Jetting- Standfard Carbs, K +N, pipes?

Post by CH_R1 » Wed Mar 24, 2010 3:05 pm

Cheers for the info. Moving house this summer so most of my spare times spent DIYing now but hopefully be able to escape up north for a few days late summer.

Post Reply