Please share your secrets! What mods have you made to your TRX?
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
steve speed
- Site Sponsor
- Posts: 1780
- Joined: Sun Jan 14, 2007 9:11 pm
- Location: rochdale England
Post
by steve speed » Thu Nov 20, 2008 7:06 pm
Hans wrote:steve speed wrote:from disk to disk across the wheel were it bolts on ,,,,a R1 wheel is 126mm
Really, that wide? OK, thanks! Then it's not possible to bolt on a R1 rim. What dimension is the shaft btw?
And just to clarify, I don't mean the distance between the actual brake area, the swept area, but the wheel's thickness where they bolt on. I think You understood that right, but just wanted to make myself a bit clearer. English isn't the first language for me nor for plenty others here
I looked at the wrong nrs, my Marvic rims have 115,3 mm between disc to disc where they bolt on, and the other rim (YZF750 or standard) has 113 mm.
were they bolt on is 125mm, across the wheel,ive now measured it with a vernier ,,, shaft or axle is 22mm ,, don't forget there is no speedo drive on the R1 so perhaps that's why its wider
TRX850 ,The thinking mans R1
-
honkdawillydahonk
- TRX-Enthusiast
- Posts: 443
- Joined: Thu Jan 06, 2005 8:08 pm
- Location: Reading, England
Post
by honkdawillydahonk » Sun Nov 23, 2008 11:05 am
NEVER EAT ANYTHING BIGGER THAN YOUR HEAD
-
idl1975
- TRX-Enthusiast
- Posts: 749
- Joined: Wed Feb 21, 2007 9:19 am
- Location: Surrey
Post
by idl1975 » Tue Nov 25, 2008 9:59 am
Does anyone know which fenders other than YZF750 will work with the YZF forks, wheel and discs?
I mean with no or minimal modifications to anything, as I don't have a lathe (or a 5-axis CNC machine) to make up special mounting brackets...
Was going to get a new YZF pattern fender from ARD, but if I can use my TRX one or another black Yamaha one off e-bay, that would be cheaper.
-----
'04 Aprilia Tuono Fighter
'00 Scooby Sport Wagon
'76 TY250.
