Would anyone else here be interested in getting theirs done? If so, I can ask for a forum discount
EDIT ... just to clarify: by seat pad I mean the little rectangular bit between the two seats
Seat Pad Re-covering
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
Jak
- Site Administrator
- Posts: 4787
- Joined: Thu Mar 30, 2006 11:21 pm
- Location: neither here nor there
Seat Pad Re-covering
I've found a place just up the road from me that restores classic cars ... I'm taking my seat pad in on Friday morning to discuss options and prices.
Would anyone else here be interested in getting theirs done? If so, I can ask for a forum discount
EDIT ... just to clarify: by seat pad I mean the little rectangular bit between the two seats
Would anyone else here be interested in getting theirs done? If so, I can ask for a forum discount
EDIT ... just to clarify: by seat pad I mean the little rectangular bit between the two seats
This forum is (and will remain) free of advertising
Please help keep it that way : click here for details of how to donate towards forum costs
Please help keep it that way : click here for details of how to donate towards forum costs
-
slow codger
- Site Sponsor
- Posts: 2699
- Joined: Sun Oct 01, 2006 9:35 pm
- Location: The Fens
Re: Seat Pad Re-covering
My dad did mine, said the worst bit was the bum pad!Dave E
An infiltrator from the dark side!
-
trixynut
- Site Sponsor
- Posts: 2572
- Joined: Fri Sep 22, 2006 3:48 pm
- Location: Leicester, England
Re: Seat Pad Re-covering
you mean like the white bit in Slow Codgers avatar?I mean the little rectangular bit between the two seats
-
Jak
- Site Administrator
- Posts: 4787
- Joined: Thu Mar 30, 2006 11:21 pm
- Location: neither here nor there
Re: Seat Pad Re-covering
This forum is (and will remain) free of advertising
Please help keep it that way : click here for details of how to donate towards forum costs
Please help keep it that way : click here for details of how to donate towards forum costs
-
fantic125
- TRX-Enthusiast
- Posts: 163
- Joined: Wed Aug 29, 2007 11:51 pm
- Location: Sydney, NSW
Re: Seat Pad Re-covering
Hi Jak,
Do it yourself! It's really easy. I've re-covered a number of seats, and the TRX was the easiest yet. A person with your skill's won't have a problem.
You do need to be able to get hold of a staple-gun (for upholstery, not building!) that will take a minimum of 1/4inch (6mm) staples. Remove the existing vinyl (using a small screwdriver, or a nail-file! ) and take that down to the upholsterer's to get the required qty of vinyl. You also use it as the template. The existing vinyl is really thin crap and will have hardened up considerably (I'm sure there's hundreds of purile mind's out there thinking what I'm thinking!! 
), so allow an extra inch on the sizing of the pattern. You can trim this off after.
Start with the straight side's, then the rear and front, using the staple gun firmly. The plastic base is fairly soft, and the staples go in reasonably well. Once the straight sections are done, gently stretch the corners into place. If the vinyl wrinkles, remove the staples and approach from a different angle (slight pause, to allow for more purile thoughts)!
Give it a go. At the most it will set you back 5 pounds, and you'll have personalised your bike!
Bugger! I've just re-read your post and you're talking about the small pad! Same process though - the only difference is you need to trim the folds to reduce the build-up of material (same as you would when hemming a seam). 
And use lots of staples!
Do it yourself! It's really easy. I've re-covered a number of seats, and the TRX was the easiest yet. A person with your skill's won't have a problem.
You do need to be able to get hold of a staple-gun (for upholstery, not building!) that will take a minimum of 1/4inch (6mm) staples. Remove the existing vinyl (using a small screwdriver, or a nail-file!
) and take that down to the upholsterer's to get the required qty of vinyl. You also use it as the template. The existing vinyl is really thin crap and will have hardened up considerably (I'm sure there's hundreds of purile mind's out there thinking what I'm thinking!! ), so allow an extra inch on the sizing of the pattern. You can trim this off after.Start with the straight side's, then the rear and front, using the staple gun firmly. The plastic base is fairly soft, and the staples go in reasonably well. Once the straight sections are done, gently stretch the corners into place. If the vinyl wrinkles, remove the staples and approach from a different angle (slight pause, to allow for more purile thoughts)!
Give it a go. At the most it will set you back 5 pounds, and you'll have personalised your bike!
Bugger! I've just re-read your post and you're talking about the small pad!
Same process though - the only difference is you need to trim the folds to reduce the build-up of material (same as you would when hemming a seam). And use lots of staples!
These are my principles and if you don't like them...... I have others.
-
slow codger
- Site Sponsor
- Posts: 2699
- Joined: Sun Oct 01, 2006 9:35 pm
- Location: The Fens
Re: Seat Pad Re-covering
Mines done properly, and stitched. Staples rust and you cant get the edges as neat and thin. I know as I've just recovered the dining room chairs.Dave E
An infiltrator from the dark side!