top fairing & mirrors etc
looks like the fairing frame can be saved, not sure about the clipon yet, its sheared a bolt that holds inplace on the top yoke but not sure if its bent
front wheel is big time buckled both sides and looks out of allignment too, dont think it'll be able to be straightened, also tyre will need replacing coz of the impact
gear lever, although it seems to have straightened out ok
left hand switch gear and clutch lever/mount
rear under try will either need reinforcing around the indicator mount or replacing as its cracked
zorst damage will mostly polish out (and then i'll swap them round so remaining scars are on the inside)
repaired the hole in the rear/side of the clocks today
alternator cover i luckily have a spare or 2 floating around, but prolly wont worry about changing it til service time
tank has a couple of minor dinks, not gonna worry unless a decent one turns up at silly money
, although my reaction first was 
