my trx went over on its L/H side.
I've stripped the bodywork but noticed that the frame on the R/H side is different to the L/H side.
where the lower fairing support rods come out from the bottom frame rail.
On mine the R/H lower frame rail sticks out further than the L/H rail.
I would appreciate if some one could look at theirs to se if they are the same as mine or not.
have a look at the pics, you can se the rail on the R/H side(left in the pic) but not on the L/H side.(right in the pic)
here the lower rail is obviously wider than the top
in this pic it looks like its pretty much directly beneath it.
_
