Could you build/design your own tail tidy?

Wombat · Post by **Wombat** » Mon Dec 24, 2007 12:11 am

Of course no one builds one for a TRX. Would it be that hard to build or design one for yourself? Ideas?

Bob

Post by **phuk72** » Mon Dec 24, 2007 8:40 am

Yep. My rear is cut down and my light and number plate are mounted on a piece of 3mm (I think) sheet.

Started off by making a cardboard template and then got it cut to size - cost me a few beers.

dillthedog · Post by **dillthedog** » Mon Dec 24, 2007 9:50 am

can you post some pics cheers

Post by **phuk72** » Mon Dec 24, 2007 10:15 am

Nothing to see really - it is just a flat piece of sheet (broadly square) with holes drilled out for the mounts and for the rear light. if you want indicators, just add 'ears' and bend them ninety degrees.

That said, my rear mudguard is completely removed.

A long long time ago, it looked like this

honkdawillydahonk · Post by **honkdawillydahonk** » Tue Dec 25, 2007 7:53 pm

How's this for a tidy tail?

Quan-Time · Post by **Quan-Time** » Wed Dec 26, 2007 8:51 am

i think he was referring more to a TRX tail rather than changing his whole tail section over like we have.

honkdawillydahonk · Post by **honkdawillydahonk** » Wed Dec 26, 2007 9:16 am

Quan-Time wrote:i think he was referring more to a TRX tail rather than changing his whole tail section over like we have.

No shit. Really?

Humour is definately wasted on you lot.....

honkdawillydahonk · Post by **honkdawillydahonk** » Wed Dec 26, 2007 9:26 am

..... As Pete say's; knocking up a tail tidy isn't too difficult (I made one for my original rear end) Only problem is having to cut away so much of the original undertray to do it - which makes putting it back to standard impossible.