Max-this your porn film?

Ridgifumi · Post by **Ridgifumi** » Wed Sep 26, 2007 12:38 pm

http://www.youtube.com/watch?v=aKtu-nWj ... ed&search=

youngy · Post by **youngy** » Wed Sep 26, 2007 1:26 pm

mmmm sweeeet!

slow codger · Post by **slow codger** » Wed Sep 26, 2007 9:24 pm

Good early morning alarm for the neighbours. Nice 4 way hazards for those of us with a Japanese import.

Dave E

Trixz · Post by **Trixz** » Mon Oct 15, 2007 8:08 pm

The song in the beginning... whahaha.... nice exhaust indeed

ekoja · Post by **ekoja** » Mon Oct 15, 2007 10:17 pm

Is the numberplate hankie part of the system?

Quan-Time · Post by **Quan-Time** » Wed Oct 17, 2007 4:35 am

question.. is that custom exhaust, or can you actually buy them off the shelf in japan. I know that OVER dont sell their system anymore, and fairly much all you can get now is just slipon cans rather than a full system.

either way, nice video.

Post by **Max** » Wed Oct 17, 2007 5:31 am

Not my video but the same exhaust. Mine sounds better with the FCRs and fully advanced OVER ignitor.

Used to be an off the shelf item. I think Tadao stopped selling them though.

Trixz · Post by **Trixz** » Wed Oct 17, 2007 8:58 pm

Still available on demand I guess ....I've already looked, but I don't want Carbon mufflers.

Tadao homepage

But it's all Japanese, so good luck (with some help from MAX himself perhaps)

Greetz
Gerben

Post by **Max** » Thu Oct 18, 2007 12:00 am

Well, the Japanese page says "Out of Production"...

Post by **Max** » Thu Oct 18, 2007 12:14 am

Also, I should add that if you do happen to get one of these, you will need to add some gussetting to the Y joint where it splits off to the two tail pipes. It's prone to cracking there (solid one-piece system). Other than that, it's a good setup.

Trixz · Post by **Trixz** » Thu Oct 18, 2007 11:12 am

Max wrote:Well, the Japanese page says "Out of Production"...

Ahhh

Quan-Time · Post by **Quan-Time** » Thu Oct 18, 2007 11:17 am

what diameter is the tube ? can you please take a pic of the join at the bottom also for balance tubes ? the over system actually merged the 2 pipes rather than having a balance tube like the stock item does.

yer, would like some measurements / info if you wouldnt mind please

ferret · Post by **ferret** » Thu Oct 18, 2007 11:36 am

Not sure if it's of interest, but the header pipes in my Yoshi system are about 32mm od (thin walled titanium so about 31id) through a 2-1 collector and split into twins again of about 52mm od from the collector to the cans. Anyone got any idea how the Yoshi Titan system stacks up compared to the Over and Tadao systems?

Trixz · Post by **Trixz** » Thu Oct 18, 2007 12:13 pm

ferret wrote:Not sure if it's of interest, but the header pipes in my Yoshi system are about 32mm od (thin walled titanium so about 31id) through a 2-1 collector and split into twins again of about 52mm od from the collector to the cans. Anyone got any idea how the Yoshi Titan system stacks up compared to the Over and Tadao systems?

Hmmz, got any pictures of your Yoshi system perhaps

Trixz · Post by **Trixz** » Thu Oct 18, 2007 9:35 pm

This IS max.... IMHO

Greetz
Gerben