My TRX850 '98 and history of his EVOLUTION

[kokoVmaxa]

Hello guys ,
here in this topic , I will try to tell you about everything that I've done on this motorcycle........"
so this is the bike when I buy from Germany:








.............. since 10.2015........ after a little rest in Garage TRX enter in My workshop

[kokoVmaxa]

.......... and the story began on 06.02.2016


......... 2 hours after that.........


and another 2 hours............I already had a ready basis for my project:


Work in progress

[kokoVmaxa]

New Coils:




and new radiator YZF R6 2006-2015




rear shock YZF R6 2008 and issue of the montage...........








new exhaust system............

[SDN]

Looking very promising - keep posting! What overall look are you going for and what rear end will you use?

[Bostel]

I'm also very curious what your plans are with this project, but it looks promising.

[kokoVmaxa]

........... Let me show you photos which are for a later stage of my story -> ок only one spy pic overall line design:







in the Final picture of my project have parts from following bike's
Yamaha TRX850
Yamaha TDM850 3VD
Yamaha R6 '07
Yamaha R6 '08
Yamaha V-Max 1200
CBR1000RR '08
DUCATI Panigale 1199
Yamaha MT-03
Kawasaki ZR-350
.................... and many special and custom parts:
Many Carbon Parts ( soon will show you all of them ) , ACCOSSATO Control equipment , Scots OHLINS
ARROW End Can - Special Custom Order ( the ARROW Factory is in one near city )

[knumbnutz]

I like where this is travelling !
..... and I thought I had overengineered my shock mount !!!
One question, what denso coils did you use ?

[M.V.]

Looking great, keep the updates coming!

[Wombat]

This is the one posted on Facebook
yes, very promising!

Bob

[kokoVmaxa]

Ignition coils coming from HONDA CBR 600RR 2005-06 model with wiring harness and when you remove Fork and Radiator - this is 1 hour work to install


- Easy , Fast and really good mod with nice result

about the Shock............... this shock cost me 4 days , but I have success and put 2008 R6 Shock in to the 2007 R6 swingarm and 98 TRX850























Original Linkage from TRX and adjustable ride height links for R6:





........ and exhaust header






............ so in last 3 days working on to the - detachable rear subframe

[Richy]

Not being picky but the shock linkage looks to be all pulling in a straight line? (if that made sense)

[kokoVmaxa]

Not being picky but the shock linkage looks to be all pulling in a straight line? (if that made sense)

.......... yep if some body can pull it from the back side - Yes in other case Swingarm moving Up - Down so the links pull linkage in Direction - "Up" and the Rear Shock - push it back and you just looking in wrong line of direction

[Rich]

Ignition coils coming from HONDA CBR 600RR 2005-06 model with wiring harness

can you let me know the coil part numbers and primary resistance?

Thanks

[kokoVmaxa]

I dont know part number - if you wish you can reach in: http://www.megazip.ru/zapchasti-dlya-motocyklov/honda
full part manuals for ANY Bike and I use this web when order spare parts in service

............ soon I will be ready with the subframe and will post the pics of this small and beautiful work of art it took me 1 week

[Rich]

Denso 129700-4510 (1.4 Ohm) are you running with std ECU and putting some resistors in series?

That's what I was going to do if I can't (I haven't yet) found some 4 Ohm ones.