winter project.....

[trxify]

Bigger job changing the cablestem, just got to get my Matris cartriges in the front as well...time to get to it!!

Err, what killerwhale? and yes please more pictures, very interesting work to many i'm sure, good stuff.

[Killerwhale]

Bigger job changing the cablestem, just got to get my Matris cartriges in the front as well...time to get to it!!

Err, what killerwhale? and yes please more pictures, very interesting work to many i'm sure, good stuff.

Well, just installed oiltank today....flywheel going to be changed and custom front sprocket. But next is oiltray...doing it tomorrow.



...and yes, it´s in my kitchen!

[Killerwhale]

Picked up after some powder....slowly moving forward....

[Killerwhale]

...and a while back i did the tray oilpipes etc.

[Killerwhale]

....and was astounded of the amount of metal parts in the coarce filter of the "new" parts...

[coxylaad]

hello mate, have you had any thoughts about that left side engine mount?

its either going to be welding a lug onto the head, or extending the frame down to the front engine mount, which will be fugly.


I looked at that german one, couldn't see what he had done about it - if anything.

[Killerwhale]

hello mate, have you had any thoughts about that left side engine mount?

its either going to be welding a lug onto the head, or extending the frame down to the front engine mount, which will be fugly.


I looked at that german one, couldn't see what he had done about it - if anything.

I´m using the TRX head

[Mincehead]

Are you having the TRX head machined to match the TDM head`s squish band Killerwhale?

[Killerwhale]

Are you having the TRX head machined to match the TDM head`s squish band Killerwhale?

I´ve done the easy part, i leave the rest to the tuner!

[Mincehead]

Ah ok, likely the head will be machined to suit then.

[Killerwhale]

Ah ok, likely the head will be machined to suit then.

I know in DE they´ve all (almost) skimmed it up to 12-ish:1 in comp anyway, aiming for that!

[Mincehead]

Yep, all the best prepared motors making good BHP figures are between 11.5 and 12.5 to 1.

[coxylaad]

sorry to labour on the point and I know you arent doing it, but do you have any information on what they do about that lack of engine mounting lug on the left of the head?

I would rather not have it welded if I could get away with it, but if I have to so be it.

[Killerwhale]

sorry to labour on the point and I know you arent doing it, but do you have any information on what they do about that lack of engine mounting lug on the left of the head?

I would rather not have it welded if I could get away with it, but if I have to so be it.

I´ve only seen one TRX with TDM head and it was on a Swedish "for sale" site, sorry to say i did not see the side where there are no lug. My G U E S S though is he just let it be and fastened in only one side...

[coxylaad]

would that be safe?

I would prefer to have a lug welded onto the head if possible.