Hi Brian. Yeah my plan is run a oil pressure gauge that has a built in adjustable alarm, this one:
http://www.roadrunneroffroad.com.au/Oil ... Alarm.html
I'll check your thread now. Cheers mate
Simple install Oil pressure switch adapters
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
- johno440
- Site Sponsor
- Posts: 99
- Joined: Thu Dec 02, 2010 2:44 am
- Location: Brisbane, Australia
- Mincehead
- TRX-Enthusiast
- Posts: 6345
- Joined: Sun Jan 25, 2009 1:40 pm
- Location: West Sussex
- Contact:
Re: Simple install Oil pressure switch adapters
It won`t show much pressure scaled as it is, can anyone remember the `expected` oil pressure?
I seem to remember it was quite low in the psi scale.
I seem to remember it was quite low in the psi scale.
LOUD PIPES SAVE LIVES
- johno440
- Site Sponsor
- Posts: 99
- Joined: Thu Dec 02, 2010 2:44 am
- Location: Brisbane, Australia
Re: Simple install Oil pressure switch adapters
I'm sure I read the following but have since deleted the saved thread....
Idle 1 Bar (14psi)
Handful of throttle 4 Bar (58psi)
and the switch used triggered the warning light at 0.3 Bar (4.35psi)
Idle 1 Bar (14psi)
Handful of throttle 4 Bar (58psi)
and the switch used triggered the warning light at 0.3 Bar (4.35psi)
- fung
- Site Sponsor
- Posts: 1605
- Joined: Mon Aug 23, 2010 2:00 am
- Location: Gold Coast. South East Queensland.
Re: Simple install Oil pressure switch adapters
fung wrote:I received an email from Lee Henty today.
He tells me that he has ten adapters ready to go.
5 pounds sterling plus postage.
His email address is
leehenty@gmail.com
Cheers
Fung
I WOULD RATHER WEAR OUT THAN RUST