Close to getting my YZF rear wheel in with 180 tyre.
The 180 tyre is about 63cm diameter, and the 160 rear is about 59cm. Is this gonna effect my gearing much?
Anyone out there that can do the maths?
Cheers,
Dave.
YZF rear and 180 tyre...
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
- trixynut
- Site Sponsor
- Posts: 2572
- Joined: Fri Sep 22, 2006 3:48 pm
- Location: Leicester, England
- burty
- Site Sponsor
- Posts: 683
- Joined: Wed Nov 09, 2005 11:38 pm
- Location: Rochester, UK.
- Contact:
- trixynut
- Site Sponsor
- Posts: 2572
- Joined: Fri Sep 22, 2006 3:48 pm
- Location: Leicester, England
- burty
- Site Sponsor
- Posts: 683
- Joined: Wed Nov 09, 2005 11:38 pm
- Location: Rochester, UK.
- Contact:
-
- TRX-Enthusiast
- Posts: 1
- Joined: Sun Dec 09, 2012 9:13 am
Re: YZF rear and 180 tyre...
im thinkin of putting R1 Rear Wheel On any info would be greatly apreciated . Dazz
- Mincehead
- TRX-Enthusiast
- Posts: 6345
- Joined: Sun Jan 25, 2009 1:40 pm
- Location: West Sussex
- Contact:
Re: YZF rear and 180 tyre...
You`ll have to modify the stock TRX swingarm if you really want to go down that route, R1 uses a bigger diameter wheel spindle and I seem to recall that you cannot get bearings with an o/d to suit the R1 wheel, but with an i/d to suit a TRX wheel spindle.
Unless somebody knows different
Go Thunderace swingarm with rear wheel assembly and you can have the larger diameter rear wheel spindle though.
Unless somebody knows different
Go Thunderace swingarm with rear wheel assembly and you can have the larger diameter rear wheel spindle though.
LOUD PIPES SAVE LIVES