Forks.

General Discussion Forum for TRX Enthusiasts...

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
kenbev
TRX-Enthusiast
Posts: 42
Joined: Sat Jul 04, 2020 3:45 am

Forks.

Post by kenbev » Thu Jul 30, 2020 5:56 am

What have I done wrong? Have removed top parts of fork and have not touched damper rod or bolt now I cannot get the top parts back as they do not drop down far enough and rest on the damper rod. Help please Thanks. Kenbev. :oops: :oops:
Top
Tealman
TRX-Enthusiast
Posts: 65
Joined: Sun Aug 28, 2016 10:34 pm

Re: Forks.

Post by Tealman » Thu Jul 30, 2020 7:55 pm

Provided there's no pressure on the fork bottoms which might be shortening them, then it's generally a matter of applying sufficient force to allow the threads to engage. Done it a few times without any issues.
Top
kenbev
TRX-Enthusiast
Posts: 42
Joined: Sat Jul 04, 2020 3:45 am

Re: Forks.

Post by kenbev » Fri Jul 31, 2020 3:47 am

Tealman,The fork itself is stuck in the leg. Measured it against the complete one and is a good six inches shorter so something is holding it as I cannot get it to pull back up. Thanks for your reply. Kenbev. #-o #-o
Top
kenbev
TRX-Enthusiast
Posts: 42
Joined: Sat Jul 04, 2020 3:45 am

Re: Forks.

Post by kenbev » Fri Jul 31, 2020 10:10 am

Job done, It was really jammed in but all fixed now. Once again thanks. Kenbev.
Top
Post Reply

Return to “Yamaha TRX850 Enthusiasts Central Forum”