Rear spindle nut thread size and pitch

General Discussion Forum for TRX Enthusiasts...

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
TRX850GUY
TRX-Enthusiast
Posts: 2
Joined: Tue Feb 26, 2019 1:15 pm

Rear spindle nut thread size and pitch

Post by TRX850GUY » Thu Feb 28, 2019 12:16 pm

Hi there guys, i don't suppose anybody out there can tell what the thread size and pitch is on the rear spindle nut
It takes a 27mm spanner/socket so it's not M18x1.5 that's to small and it's not M24x1.5 that's to big
I am guessing it's M20x1.5 but am not sure, if anybody knows please let me know.

I will measeure at the weekend, but it's good to know what everybody else says

cheers
Top
bevie
TRX-Enthusiast
Posts: 81
Joined: Wed Sep 27, 2006 10:08 am
Location: Central Scotland

Re: Rear spindle nut thread size and pitch

Post by bevie » Thu Mar 14, 2019 1:54 pm

It's M18 x 1.5
Top
User avatar
Tarwetijger
TRX-Enthusiast
Posts: 1537
Joined: Tue May 15, 2007 9:31 am
Location: Netherlands, Assen
Contact:
Contact Tarwetijger

Re: Rear spindle nut thread size and pitch

Post by Tarwetijger » Thu Mar 14, 2019 8:51 pm

TRX850GUY wrote: so it's not M18x1.5
bevie wrote:It's M18 x 1.5
:-k :-D
Top
cobbadiggabuddyblooo
Site Sponsor
Posts: 6809
Joined: Thu Aug 28, 2008 9:19 am
Location: Brisbane,Australia

Re: Rear spindle nut thread size and pitch

Post by cobbadiggabuddyblooo » Sat Mar 16, 2019 1:33 pm

MMMMM 20mm axle x 1.5 = 30
laughter is the best medicine
Top
Post Reply

Return to “Yamaha TRX850 Enthusiasts Central Forum”