Hi there guys, i don't suppose anybody out there can tell what the thread size and pitch is on the rear spindle nut
It takes a 27mm spanner/socket so it's not M18x1.5 that's to small and it's not M24x1.5 that's to big
I am guessing it's M20x1.5 but am not sure, if anybody knows please let me know.
I will measeure at the weekend, but it's good to know what everybody else says
cheers
Rear spindle nut thread size and pitch
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
- TRX-Enthusiast
- Posts: 2
- Joined: Tue Feb 26, 2019 1:15 pm
-
- TRX-Enthusiast
- Posts: 81
- Joined: Wed Sep 27, 2006 10:08 am
- Location: Central Scotland
Re: Rear spindle nut thread size and pitch
It's M18 x 1.5
- Tarwetijger
- TRX-Enthusiast
- Posts: 1537
- Joined: Tue May 15, 2007 9:31 am
- Location: Netherlands, Assen
- Contact:
Re: Rear spindle nut thread size and pitch
TRX850GUY wrote: so it's not M18x1.5
bevie wrote:It's M18 x 1.5
-
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia