Arriving to the party late...

General Discussion Forum for TRX Enthusiasts...

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
Bitza
TRX-Enthusiast
Posts: 3
Joined: Mon Jan 15, 2018 12:27 pm

Arriving to the party late...

Post by Bitza » Sat Mar 10, 2018 3:14 am

G'day All,

I'm from the Nanny State best know as Melbourne. I purchased my TRX about 6months ago. She'd been in an accident so I picked her up pretty cheap. I'm trying to restore her back to original.
Whilst the plastics were difficult to source, I have collected a full set in relatively good condition. Now I'm not far off from getting her repainted.
My current conundrum is Stickers/Decals. I've almost got the OEM Part numbers figured out... however, like the plastics, there aren't many around...
Does anyone here know of someone who does aftermarket decals for the TRX?
-Including the elusive part# 4UN-2173E-00 (the Side Cover Graphic seen on the Red/Black TRX above).
Any help would be much appreciated.

Thanks in advance!

User avatar
dicky
Site Sponsor / Administrator
Posts: 1053
Joined: Thu Jan 06, 2005 11:26 am
Location: Ruffy, Victoria.

Re: Arriving to the party late...

Post by dicky » Sat Mar 10, 2018 5:16 am

I bought a complete set a few years back from e-bay.
Vendor was based in Birmingham, trading on ebay as Mrs Slocum, but seems like the real name is Dawn Good, operating Goodgraphics.
Doesn't seem to be active on ebay now.
Maybe someone in the UK might have more info.
dicky
OOOSDC #5

Bitza
TRX-Enthusiast
Posts: 3
Joined: Mon Jan 15, 2018 12:27 pm

Re: Arriving to the party late...

Post by Bitza » Sat Mar 10, 2018 3:13 pm

Thank you dicky - I've found an eBay Sale in the UK from the same person Mrs Slocum... Trying to verify if it's still current.
In the meantime - I may have found a complete OEM set. I'll share my findings in the next day or two for anyone else having similar issues.

Thanks again.

gizzo
TRX-Enthusiast
Posts: 22
Joined: Sat Aug 05, 2017 4:11 pm

Re: Arriving to the party late...

Post by gizzo » Fri Mar 16, 2018 5:48 am

Not Jeremy who I sold my green bodywork to recently by any chance?
simon

Bitza
TRX-Enthusiast
Posts: 3
Joined: Mon Jan 15, 2018 12:27 pm

Re: Arriving to the party late...

Post by Bitza » Mon Mar 26, 2018 3:22 am

gizzo wrote:Not Jeremy who I sold my green bodywork to recently by any chance?
simon
The one and the same! - How you doing mate?

gizzo
TRX-Enthusiast
Posts: 22
Joined: Sat Aug 05, 2017 4:11 pm

Re: Arriving to the party late...

Post by gizzo » Fri Apr 06, 2018 7:50 am

Yeah, good thanks mate. The TReX is going like a champ. Here's a link to my thread with a few pics of the fairing donor if you're interested.
http://www.trx850.com/phpBB_forum/viewt ... 06#p119120
Good luck with the project
s

Endless551
TRX-Enthusiast
Posts: 4
Joined: Sun Jun 24, 2018 11:39 am

Re: Arriving to the party late...

Post by Endless551 » Fri Jul 13, 2018 12:44 am

Hi Gizzo, have you found the replacement decals yet? I am also based in Melbourne and going through the same issue..

User avatar
PrfctChaos
TRX-Enthusiast
Posts: 73
Joined: Wed Nov 06, 2013 2:54 am
Location: Perth, Australia

Re: Arriving to the party late...

Post by PrfctChaos » Fri Jul 13, 2018 3:52 am

Ive printed my own before, then you just give the whole fairing a couple of clear coats afterwards. works like a charm.

Obviously get it professionally printed on sticker paper for a few dollars, not a house printer.

Attached are some decal sheets.

https://www.dropbox.com/s/8w0bga0pl9l6n ... y.jpg?dl=0
https://www.dropbox.com/s/6evk9mvda0rx5 ... y.jpg?dl=0
https://www.dropbox.com/s/g0rv1q6spyezl ... y.jpg?dl=0
1996 TRX, Front end from a 2006 GSXR 750, Seat off a 2012 Triumph street triple. TDMR carbs, Laser cans, Perreli Rosso Supercorsas.

Post Reply