Hello
I have had a search through the forum and I think the engine should fit ok but can anyone shine some light on the issues I might have with neutral light/TPS etc. The story behind this is have recently got a TRX but keeps jumping out of 4th Gear so the plan as it stands is to put another engine in it till I have time to strip the trx engine and repair the gearbox and if it's out paint it. Cheers
TDM 4tx engine into TRX
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
- TRX-Enthusiast
- Posts: 1
- Joined: Thu Sep 19, 2019 7:55 am
- Location: Scotland
- Tarwetijger
- TRX-Enthusiast
- Posts: 1537
- Joined: Tue May 15, 2007 9:31 am
- Location: Netherlands, Assen
- Contact:
Re: TDM 4tx engine into TRX
The TPS is on the carbs so that won't be any trouble when you use the other engine with the orignal carbs.
The neutral sensor of a TDM 4TX is even better, as it has connections for all gears, whereas the TRX originally only has one connection, for neutral only.
Simply to connect to a DIY gear indicator.
You have to switch the oil tanks, that's the only thing I know. No personal experience though.
The 1st gear is a lot shorter with a TDM engine.
The neutral sensor of a TDM 4TX is even better, as it has connections for all gears, whereas the TRX originally only has one connection, for neutral only.
Simply to connect to a DIY gear indicator.
You have to switch the oil tanks, that's the only thing I know. No personal experience though.
The 1st gear is a lot shorter with a TDM engine.
- Rod.s
- Site Sponsor
- Posts: 1404
- Joined: Sun Apr 25, 2010 11:01 am
- Location: Brisbane, Australia
Re: TDM 4tx engine into TRX
If it's not made in China, it's a fake!
- dandywarhol
- Site Sponsor
- Posts: 1639
- Joined: Fri Nov 24, 2006 12:56 pm
- Location: Edinburgh, Scotland
Re: TDM 4tx engine into TRX
Need to change over the gearchange crosshaft.
Best to fit the TRX loom, ecu and neutral switch - I seem to recall something about timing being retarded in lower gears on TDM - hence the 4 wires for the gear selector/neutral switch
Best to fit the TRX loom, ecu and neutral switch - I seem to recall something about timing being retarded in lower gears on TDM - hence the 4 wires for the gear selector/neutral switch
1996 TRX 850, blue, Ohlins 46HRCLS, Race Tech Gold Valves, 0.90 springs, Venom pipes, R6 brakes............
1974 Yamaha RD250A, Candy Blue
1998 Yamaha SZR660, blue of course
1967 Yamaha TD1C 250, Blue and white
1974 Yamaha RD250A, Candy Blue
1998 Yamaha SZR660, blue of course
1967 Yamaha TD1C 250, Blue and white