Would anyone here know the part number or dimensions of the water pump impeller bearing? The bearing isn't sold separately as a trx or tdm item but im sure its interchangeable with other yamaha models.
cheers Bane.
Impeller bearing
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
bane
- TRX-Enthusiast
- Posts: 79
- Joined: Mon Oct 27, 2008 12:57 pm
- Location: melbourne australia
-
Mincehead
- TRX-Enthusiast
- Posts: 6345
- Joined: Sun Jan 25, 2009 1:40 pm
- Location: West Sussex
- Contact:
Re: Impeller bearing
Measure it with Verniers and simply go to a bearing supplier, bearings are made to standard sizes:
http://simplybearings.co.uk/shop/
http://simplybearings.co.uk/shop/
LOUD PIPES SAVE LIVES
-
bane
- TRX-Enthusiast
- Posts: 79
- Joined: Mon Oct 27, 2008 12:57 pm
- Location: melbourne australia
Re: Impeller bearing
Cheers mate, all good. I was just being lazy and wanted to buy the bearing before removing the pump. Wrong diagnosis on my part though. What I thought was a noisy bearing turned out to be a dislodged circlip.
-
Mincehead
- TRX-Enthusiast
- Posts: 6345
- Joined: Sun Jan 25, 2009 1:40 pm
- Location: West Sussex
- Contact:
Re: Impeller bearing
Ahaaa, that`s a bit less of a problem to sort then, but WHY had a circlip become dislodged?
LOUD PIPES SAVE LIVES
-
bane
- TRX-Enthusiast
- Posts: 79
- Joined: Mon Oct 27, 2008 12:57 pm
- Location: melbourne australia
Re: Impeller bearing
No idea, I rebuilt the water pump nearly 2 years ago and haven't had a problem in all that time. Circlip replaced with a new one just in case. The impeller left a nice countersink in the pump housing.
Cheers.
Cheers.
-
Con Rod
- Site Sponsor
- Posts: 1126
- Joined: Wed Nov 16, 2011 11:48 pm
- Location: Sydney, Australia
Re: Impeller bearing
I had the exact same thing happen
I should have pinched up the cir-clip before I put it back in
I should have pinched up the cir-clip before I put it back in
Paul