got a bit of a build going on and just cannot find what i'm after.
I want to run a race type set up on the rear and front master cylinders. I'd like to use tubes instead of the fluid pots. The tubes are easy enough to find but i cant find in the UK where to get the angled nozzles that leave the master cylinders, as this is what i need to change.... anyone know where to get them? got brembos front and rear if that helps.. cheers
bit of help if you please
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
ac@39
- Site Sponsor
- Posts: 162
- Joined: Tue Sep 10, 2013 7:57 pm
- Location: Neath - South Wales
bit of help if you please
inspired by san miguel
-
Mav617
- TRX-Enthusiast
- Posts: 169
- Joined: Mon Oct 27, 2014 11:49 am
- Location: Copthorne, W Sussex
Re: bit of help if you please
GP100, Z200, RD250LC, CB250RS, RD250LC, GSXR400, RZ250LC, TZR250, FZR600, FZR600R, SZR660, VTR1000F, TRX850 x 2, MT-03, LCII 350 YPVS, VTR1000F
-
ac@39
- Site Sponsor
- Posts: 162
- Joined: Tue Sep 10, 2013 7:57 pm
- Location: Neath - South Wales
Re: bit of help if you please
Working away at the moment so trying to do all on a phone and I'm too old to peer at small print for too long but yes those are the kiddies .. But I want different angled ones so as to keep tube upright. Will have a better look on pc when I get home. Don't really want to weld a bracket onto frame to hold the fluid pot.
inspired by san miguel