how to start without ignition barrel
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
ac@39
- Site Sponsor
- Posts: 162
- Joined: Tue Sep 10, 2013 7:57 pm
- Location: Neath - South Wales
how to start without ignition barrel
Will keep questions away from mods/upgrades,as at this stage i just want to see if the engine i have is viable. I now have an engine in my frame and have stripped carbs and cleaned. i have Ecu, rectifier and starter motor and side stand with cutout switch and coils, i have sourced right hand switch gear and starter relay and main loom (complete with fuses). Battery and earth strap on its way too. When all these are connected and assuming i have no broken wires/blown fuses, What i dont have is an ignition barrel and key and have never hot wired anything so can anyone tell me how to make the circuit complete in order to see if she fires up? Also would the tps need to be connected to anything for this to happen .. am really hoping that these bikes arent the same as my S4r and need to have the clocks connected?
inspired by san miguel