How does this sound to you?

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
gregs656
TRX-Enthusiast
Posts: 511
Joined: Sun Sep 23, 2007 7:48 pm
Location: Sunny Bognor Regis

How does this sound to you?

Post by gregs656 » Thu Feb 25, 2010 5:37 pm

I'm a little worried about the noises from our trixie. I did a spate of 3 mile each way commuting and I reckon it didn't do my bike any favors at all. Went down to plymouth on here in November and she never missed a beat, hardly used since then.

Booked it on to have the valve clearances done, but is that likely to be the issue here? I reckon me and trixie are in the for long haul so I don't particularly want her to go pop. Thoughts!

Image
The Hunt Continues . . .

User avatar
phuk72
Site Sponsor / Administrator
Posts: 3522
Joined: Thu Jan 06, 2005 1:47 pm

Re: How does this sound to you?

Post by phuk72 » Thu Feb 25, 2010 8:31 pm

impossible to diagnose via a video
Image

gregs656
TRX-Enthusiast
Posts: 511
Joined: Sun Sep 23, 2007 7:48 pm
Location: Sunny Bognor Regis

Re: How does this sound to you?

Post by gregs656 » Thu Feb 25, 2010 8:57 pm

Aye but how does it sound to you. They're quite noisey engines and I can't decide if I'm convincing my self there's a problem . . .
The Hunt Continues . . .

User avatar
steve speed
Site Sponsor
Posts: 1780
Joined: Sun Jan 14, 2007 9:11 pm
Location: rochdale England

Re: How does this sound to you?

Post by steve speed » Fri Feb 26, 2010 1:59 pm

sound ok but a bit tappety
TRX850 ,The thinking mans R1

User avatar
phuk72
Site Sponsor / Administrator
Posts: 3522
Joined: Thu Jan 06, 2005 1:47 pm

Re: How does this sound to you?

Post by phuk72 » Fri Feb 26, 2010 2:07 pm

steve speed wrote:sound ok but a bit tappety
mine has always made a feck load of noise from the top end - and even more when I put Kent cams in

clearances etc all OK so put it down to 'character'
Image

gregs656
TRX-Enthusiast
Posts: 511
Joined: Sun Sep 23, 2007 7:48 pm
Location: Sunny Bognor Regis

Re: How does this sound to you?

Post by gregs656 » Fri Feb 26, 2010 9:40 pm

I took it to a mechanic round here who knows his shit when it comes to yammys and he reckons it sounds fine and I'm just being and idiot. He did say I might find I get a bit more cam chain rattle until it loosens off enough to go into it's next click of adjustment, but basically not to worry about it.

Does sound good 8)

I think because it's quite a noisey engine, I get used to certain rattles for a while and then for what ever reason notice them again and convince my self they're new. After nearly two years and how ever many thousands of miles I would know what the bloody thing sounded like!
The Hunt Continues . . .

User avatar
Quan-Time
Site Sponsor
Posts: 943
Joined: Tue Jan 16, 2007 7:17 am
Location: Riding or swingin a spanner

Re: How does this sound to you?

Post by Quan-Time » Mon Mar 01, 2010 1:25 pm

the TRX couldnt make more noise if it was desired that way. Its just inherent in its design nature, as phuk said.

5 valve, direct onto buckets, chain design, style of chain, its just REALLY noisy.. and i love it to bits !
-------------------
I dont have a sig
-------------------

cobbadiggabuddyblooo
Site Sponsor
Posts: 6809
Joined: Thu Aug 28, 2008 9:19 am
Location: Brisbane,Australia

Re: How does this sound to you?

Post by cobbadiggabuddyblooo » Sat Mar 06, 2010 1:35 pm

WELL AS LONG AS YOU FOUND SOMEONE WHO KNOWS WHAT THEY ARE DOING THATS HALF THE BATTLE :lol: :lol: FIRST FELLOW I SAW WHEN LOOKING AT GETTING A NEW CAMCHAIN LOOKED AT THE BIKE TOLD ME OF A BAD EXPERIENCE HE HAD OF A TRADE IN THAT NEEDED A FULL REBUILD,LOOKED AT THE 100,000KM ODD ON THE CLOCK AND STARTED THE MOTOR WITH THE SLIDES IN THE FCR'S RATTLING AWAY. STRAIGHT AWAY HE LOOKED AT ME AND SAID WITH THAT AMOUNT OF NOISE I'D BE GETTING RID OF IT :lol: :lol: PAT AND HIS IGNORANCE ALL BECAUSE OF HIS PREVIOUS BAD EXPERIENCE ON A TRX
laughter is the best medicine

Post Reply