Carb bits- what do I need to buy?

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
User avatar
Kayla
Site Sponsor
Posts: 1670
Joined: Fri Jul 04, 2008 7:49 am
Location: County Durham

Carb bits- what do I need to buy?

Post by Kayla » Sun Aug 17, 2008 3:34 pm

I think my bike is running a bit fat so I'm going to do the emulsion tubes and needles as a precaution. Is the Kedo 'Anti-Ruckel-Kit' (part no. 30601) what I need to buy? It looks like it is, but I can't read German and Google translator doesn't make much sense.

The bike has a standard filter and open 2-2 pipes and doesn't have the 'bark' it should have when you blip the throttle. Finances forbid Keihins at the moment :(

Thanks.
Image

Just because you're breathing, it doesn't mean you're alive.

youngy

Re: Carb bits- what do I need to buy?

Post by youngy » Sun Aug 17, 2008 5:07 pm

Don't buy the anti-ruckel kit, whatever you do. It does not use standard needles and jets and many people have had problems with setting the carbs up properly when this kit is fitted.

TBH you will probably only need the emulsion tubes part number 28958, but if you really want needles they are part number 28983. Page 57 in the Kedo catalogue.

User avatar
Kayla
Site Sponsor
Posts: 1670
Joined: Fri Jul 04, 2008 7:49 am
Location: County Durham

Re: Carb bits- what do I need to buy?

Post by Kayla » Sun Aug 17, 2008 5:20 pm

Ah, great, thanks for the heads-up.
Image

Just because you're breathing, it doesn't mean you're alive.

Post Reply