blue spots

ynotbiker · Post by **ynotbiker** » Fri Nov 30, 2007 4:44 pm

ive got brembo brakes fitted to bike as its a import the last owner put on braded hoses do anybody think they will be ok,because can get some blue spots off ebay, is it worth it cheers tony

Post by **phuk72** » Fri Nov 30, 2007 8:28 pm

Difference is like night and day - bluespots rock

steve speed · Post by **steve speed** » Fri Nov 30, 2007 9:57 pm

what phuk72 says ,,,and use some good pads ,, i use EBC double sintered

Tarwetijger · Post by **Tarwetijger** » Fri Nov 30, 2007 9:58 pm

And there are plenty people that would like the Brembo's, so I think you can sell them easily.

slow codger · Post by **slow codger** » Sun Dec 02, 2007 4:54 pm

Ynot, have you changed the fork internals, my soft Japanese import springs used to bottom when I hauled on the Brembos, rattling my fillings. Have changed to English/Euro springs, and it now retains some shock absorbtion. Brembos and braided lines work fine for me on the road, However Phuk has used his on the track, where the blue spot braking would come in handy for diving up the inside of the 600's.

Dave E

coldplayer · Post by **coldplayer** » Mon Dec 31, 2007 7:33 pm

I have the brembos on my import TRX and am more than happy with them. I tried some blue spots but found them too wooden in comparison. They were very powerfull, but just lacked some feel for me.
I dont suppose any of you guys know the part no. for a set of pads for the brembo calipers? I am going to have to replace mine soon and have no idea which ones to get.
cheers!!

youngy · Post by **youngy** » Tue Jan 01, 2008 3:03 pm

This site has all sorts Brembo. May be some pads on there

http://www.motowheels.com/italian/mypro ... i%20Brakes

slow codger · Post by **slow codger** » Tue Jan 01, 2008 4:07 pm

Its been on here before but If you e-mail Bembo they will tell you the correct pads.

Dave E

honkdawillydahonk · Post by **honkdawillydahonk** » Tue Jan 01, 2008 5:42 pm

coldplayer wrote: I tried some blue spots but found them too wooden in comparison. They were very powerfull, but just lacked some feel for me.....

They would running the standard Master cylinder.... You really need an R1/6 14mm item for the best of both worlds!