Screens

slow codger · Post by **slow codger** » Thu Oct 04, 2007 9:47 pm

Anyone tried to make there own?, as original post for a clear screen has had no replies.

Dave E

Quan-Time · Post by **Quan-Time** » Mon Oct 15, 2007 12:23 am

umm. what you after ? you can get after market clear / tinted from a company called "slipscreens" and most any bike retail outlet can contact em. They do double bubble, flat, dome rise from memory.

I got my tinted one from Show n Go motorcycles in adelaide, they can point you in the right direction..

funnily enough, http://www.findapart.com.au is a valuable resource even for new parts.. you would be surprised what you can find.. goodluck !

slow codger · Post by **slow codger** » Mon Oct 15, 2007 8:33 pm

I have a red tinted double bubble on the bike, and a standard smoke tinted one that originally came with the bike. I can get the clear one here from a company called Skidmarx, but just wondered if I got a piece of 2mm clear perspex, would it easily bend into a standard shape. Only want to play with a video camera.

Dave E

trixynut · Post by **trixynut** » Mon Oct 15, 2007 9:34 pm

Dave,

I've videoed with a tank mounted camera thro' a standard TRX light-smoked screen, and you can't tell the difference: if anything it takes some of the road glare away. Works fine.

Or mount the camera on the side of your bike.

Or tape it to your helmet!

Dave.

slow codger · Post by **slow codger** » Mon Oct 15, 2007 9:49 pm

Its an old camera, wont be taping it to my head as I may fall off when coming to a stop, I have found a do it yourself mount though for the side of the machine, will have to see what I've got laying around in the garage.

Dave E