Hi guys, just bought a pair of blue spots, but the question is, what braided hoses do I need
Is it a case of buying a set of r1 or r6 ones or do I need a custom length to fit the TRX
Hoses for blue spot up grade
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
- TRX-Enthusiast
- Posts: 13
- Joined: Sat Nov 07, 2015 8:54 pm
- Location: Nottingham
- highlander
- Site Sponsor
- Posts: 248
- Joined: Sun Mar 20, 2011 4:55 pm
- Location: Highlands
Re: Hoses for blue spot up grade
Std TRX should work, did for me .... but I assume you're asking because you measured up the new brakes and the hoses don't reach???
Projection Racing 2-1 with Akropovic hex carbon can, Keihin FCRs @ 150 main, R6 shock conversion, 520 chain conversion, Ignitech ignition, Li-po battery. Further weight reduction & front suspension in progress ....
-
- TRX-Enthusiast
- Posts: 13
- Joined: Sat Nov 07, 2015 8:54 pm
- Location: Nottingham
Re: Hoses for blue spot up grade
I haven't had time to install them yet, but I had read the the angle of the banjo that bolts to calliper was the wrong angle
- M.V.
- Site Sponsor
- Posts: 1509
- Joined: Sat Jul 04, 2009 3:23 am
- Location: Melbourne, Australia
Re: Hoses for blue spot up grade
I used standard HEL lines, l but flipped them around at the caliper end.
-
- TRX-Enthusiast
- Posts: 13
- Joined: Sat Nov 07, 2015 8:54 pm
- Location: Nottingham
Re: Hoses for blue spot up grade
Thanks for the info guys, hopefully get them fitted over the Xmas break