Someone who got their rearwheel off...!?
Posted: Thu Mar 22, 2007 5:52 pm
Is there someone who has the rearwheel off and can check the spindle length....preferably in cm! 
Cheers!
Cheers!
Yamaha TRX850 Enthusiasts Forum
http://www.trx850.com/phpBB_forum/
Someone who got their rearwheel off...!?
Page 1 of 1
Posted: Thu Mar 22, 2007 9:56 pm
will be able to measure mine this weekend, got a spare one.
Posted: Fri Mar 23, 2007 7:52 am
PhatVR6 wrote:will be able to measure mine this weekend, got a spare one.
Posted: Sun Mar 25, 2007 8:28 pm
And the magic number are!?PhatVR6 wrote:will be able to measure mine this weekend, got a spare one.
Posted: Mon Mar 26, 2007 11:00 am
how you mean "spindle" length.. do you mean axle ? i have a spare wheel sitting in the shed atm.. im fairly sure i have an axle to go with it. actually and a swingarm aswell...
what info you want...
Ive put this thread on "notify" so i should get an email asap.
what info you want...
Ive put this thread on "notify" so i should get an email asap.
Posted: Mon Mar 26, 2007 1:38 pm
It´s actually an englishman asking....but lets call it axle and spacers...ok!?Quan-Time wrote:how you mean "spindle" length.. do you mean axle ? i have a spare wheel sitting in the shed atm.. im fairly sure i have an axle to go with it. actually and a swingarm aswell...
what info you want...
Ive put this thread on "notify" so i should get an email asap.
Posted: Mon Mar 26, 2007 1:50 pm
yup its 10pm now, but ill post a pic and measurements tomorrow.
PS: i do actually know imperial, but coz its a Japanese bike, everytihng is metric, and australia is metric,, so thats what you get
PS: i do actually know imperial, but coz its a Japanese bike, everytihng is metric, and australia is metric,, so thats what you get
Posted: Mon Mar 26, 2007 2:34 pm
Just fine! Thanks a lot!Quan-Time wrote:yup its 10pm now, but ill post a pic and measurements tomorrow.
PS: i do actually know imperial, but coz its a Japanese bike, everytihng is metric, and australia is metric,, so thats what you get
Posted: Mon Mar 26, 2007 9:00 pm
Hi Killer!
Just been in the cellar doin' a little measuring on my (rear wheel) spare axle.
Here are the results:
Overall length: 320 mm
Length of thread: app. 21 mm (without the radius)
Thickness of the collar at the end of the axle opposite to the thread: 6 mm
Thickness of the first prism: 7,0 mm
Thickness of the second prism: 10,0 mm
Thickness of the spacer: 14,0 mm
Thickness of the washer: 3,0 mm
(Dimensions with ",0" are measured with a slide gage)
I hope it helps.
Dimensioning greetings from Munich!
Just been in the cellar doin' a little measuring on my (rear wheel) spare axle.
Here are the results:
Overall length: 320 mm
Length of thread: app. 21 mm (without the radius)
Thickness of the collar at the end of the axle opposite to the thread: 6 mm
Thickness of the first prism: 7,0 mm
Thickness of the second prism: 10,0 mm
Thickness of the spacer: 14,0 mm
Thickness of the washer: 3,0 mm
(Dimensions with ",0" are measured with a slide gage)
I hope it helps.
Dimensioning greetings from Munich!
Posted: Mon Mar 26, 2007 9:54 pm
Can´t do better than that!!! Much appreciated!HolerTogni wrote:Hi Killer!
Just been in the cellar doin' a little measuring on my (rear wheel) spare axle.
Here are the results:
Overall length: 320 mm
Length of thread: app. 21 mm (without the radius)
Thickness of the collar at the end of the axle opposite to the thread: 6 mm
Thickness of the first prism: 7,0 mm
Thickness of the second prism: 10,0 mm
Thickness of the spacer: 14,0 mm
Thickness of the washer: 3,0 mm
(Dimensions with ",0" are measured with a slide gage)
I hope it helps.
Dimensioning greetings from Munich!
Cheers mate!