Tight wad brake line colour change !
Posted: Fri Aug 23, 2013 3:55 pm
I wanted some black lines fot Trille' but had newish some grey ones courtesy of DJ and some big heat shrink. So,
What you need is, some big [I had some 12.7mm] heat shrink, some wd40 and a hair dryer.
A brake line
Blast some wd40 in the h/s and shove the line through it, bit tricky getting it overt banjo but easy enough after that.
Leave the h/s a bit longer than needed then shrink a bit on, shake out any wd40 as best you can then heat the rest and trim it neet over the banjo.
Do the other one,
Eyyee thank yhew
What you need is, some big [I had some 12.7mm] heat shrink, some wd40 and a hair dryer.
A brake line
Blast some wd40 in the h/s and shove the line through it, bit tricky getting it overt banjo but easy enough after that.
Leave the h/s a bit longer than needed then shrink a bit on, shake out any wd40 as best you can then heat the rest and trim it neet over the banjo.
Do the other one,
Eyyee thank yhew
