Yamaha TRX850 Enthusiasts Forum

Looking for a chrome speedo and matching rev counter. I definitely want an odometer on the speedo and basic warning lights, beam, winkers etc if possible but not crucial. Someone pick some for me I'm like a tart in a wallpaper shop. No offence to our lady members

Something like this,

http://www.ebay.co.uk/itm/281071424622? ... 1438.l2649

With a matching rev counter.

Have you looked on the digital speedo website some nice stuff on there.

Don't really want a digi. I'd keep the existing, but they'l look a bit big over me new headlight. Freaking me out, I've got fettlers block again

Try "speedhut.com" good selection. Drop them into a stainless mug and mount them. to easy

or www.digital-speedos.co.uk

Took 3 days of perusing before I went back to the first one I fancied and thought, oh fukkit.


http://www.digital-speedos.co.uk/dl-03s ... -627-p.asp

If it comes quick I might actually drag the bugger out the lab for a test ride this weekend

As you may have seen,I sent a post on the same subject a few days after yours,as Im looking to do the same,could you let me know which clock you bought and how difficult it was to it wire up,and how you mounted it,also,if poss a few pics would be welcome.
Ta
Steveng

Ended up getting a Koso http://www.digital-speedos.co.uk/dl-03sr-563-p.asp

I like the look and the functions, its pretty easy to wire up,,,but I'm an electrician. What I was pissed off with though is how short the loom is,





I've got it mounted in front of the yoke now next to the ignition and the loom wouldn't even reach the tank

That's just pathetic, and it took me 3 times as long as it should have because I had to solder extra length in to most of the wires. You won't need some of them. I got the winkers, full beam/flash and neutral light and rev counter going. I'll get the oil light sorted when I get a switch to suit me gizmo I got off DixonJ.
Next pisser was the fact that its impossible to get the speed sensor mounted properly on me Yzf forks and its not close enough to the magnets, so no worky. I'll need a cable drive adapter.
I'm complaining about the length of the loom and the sensor situation. So hopefully I'll get a cable drive thrown in. If you spend £150 on something it should be perfect.
But, it looks cool on the bike, very minimalistic and does everything you need. Trip meters, you can set a warning flash at a given mileage to warn of low fuel. Does all sorts really, most of it you don't need. I just like the look of it.

I like the look of what you've done,the clock looks good nice and simple.Im thinking of mounting a clock on the headlamp,which I've already done for now with the standard set,so I'll have the same problem as you with the short harness,bit I'll get around it.I also like the look of the bars you've used,I'm want to keep the standard clip ons,but I'm not too sure about the riding position,I'm used to a more upright position on my previous bikes.If you don't mind could you send me another pic of your bike so I can get an Idea of how another set would look.
Ta
steveng

The bars are Renthal 755,and their are a couple of pics on my fettle thread. I'll take a few more this week when I've give it a polish.

Ok,they may give to something to ponder over
thanks.