Page 1 of 1

HID kit

Posted: Mon Oct 01, 2012 5:51 am
by srussell
Hi there, I am thinking about installing a HID kit. One, so I am more visable to other drivers and two, amount of light emitted from headlight is poor. Has anyone out there installed one of these and is it worthwhile? Cheers Steve.

Re: HID kit

Posted: Mon Oct 01, 2012 5:57 am
by M.V.
G'day Steve,

Yes, it's a good addition, it's better than stock, but still not perfect. A projector retrofit would be the best idea, check these guys out:

www.theretrofitsource.com

I'm currently working on a dual HID projector setup, do a search on here, there's a bit of info about.

Re: HID kit

Posted: Mon Oct 01, 2012 10:03 am
by alextrx850
srussell wrote:Hi there, I am thinking about installing a HID kit. One, so I am more visable to other drivers and two, amount of light emitted from headlight is poor. Has anyone out there installed one of these and is it worthwhile? Cheers Steve.
Same as MV..you wont have the spotlight type of high beam as the bulb has, but the H.I.D set up seems to splay the lights intensity over a wider area..and the bluish intense light brings up anything reflective in front for quite a way...and the cage drivers really can see the diference so it seems.
The fitting isnt too bad as if youve bought the one for the trx on e-bay as i did, the kit is made for the machine and the instructions are followable.
Be carefull not to handle the bulb and make sure the bulb fits into the holder freely...and then the whole lot into the rear of the headlamp.

Ive H.I.Ds in my other vehicles and havent had any issues

Re: HID kit

Posted: Mon Oct 01, 2012 11:38 am
by srussell
thanks for your help fella"s

Re: HID kit

Posted: Mon Oct 01, 2012 10:52 pm
by srussell
Hey ALEX, where did you mount the ballast?

Re: HID kit

Posted: Tue Oct 02, 2012 4:13 am
by alextrx850
srussell wrote:Hey ALEX, where did you mount the ballast?
Hi srussel..mounted the ballast on the lower platform of the inner fairing, where the little air vent is under the headlight...it also keeps the water tight ballast cooler and used a self adhesive velcro ....it sits flat to the horizontal and is out of the way...

Re: HID kit

Posted: Tue Oct 02, 2012 12:09 pm
by srussell
thanks for the tip. regards steve.

Re: HID kit

Posted: Tue Oct 02, 2012 2:53 pm
by Dan 850
srussell wrote: The fitting isnt too bad as if youve bought the one for the trx on e-bay as i did, the kit is made for the machine and the instructions are followable.
Any link, I can't find a kit for the trx. It's maybe the eBay on my phone playing up.

Cheers dan

Re: HID kit

Posted: Tue Oct 02, 2012 8:44 pm
by alextrx850
Hi Dan, im not sure to the e-ebay link, but its on our Australia e-bay...try to search the e-bay international...
i think the purchase country was England.

Re: HID kit

Posted: Tue Oct 02, 2012 9:34 pm
by Dan 850
alextrx850 wrote:Hi Dan, im not sure to the e-ebay link, but its on our Australia e-bay...try to search the e-bay international...
i think the purchase country was England.
No worries, I found one now, there's one listed under trx 850 hid. I put in trx 850 hid kit, and didn't show anything.

60 odd quid, mine was only £43 for my car and thats 2 of everything and in h4, Reckon I can make one up, out of spares I have thinking about it.