Page 1 of 1

r1 tail / seat unit conversion need pic`s @ info

Posted: Wed Aug 20, 2008 7:09 pm
by BOB.T
hi all i have seen lots of trx`s with this mod do you have any pic`s of the mod @ some info on how it`s done do`s the r1 seat have the same fitting point
thanks :wave:

Re: r1 tail / seat unit conversion need pic`s @ info

Posted: Fri Aug 22, 2008 3:10 am
by rhysp3ct
yes im also interested it looks awesome. any info would be great!

Re: r1 tail / seat unit conversion need pic`s @ info

Posted: Tue Aug 26, 2008 5:28 am
by Granger
I'm also interested. Details such as year model of R1/R6, mounting points, photos of mounts/mounting, and if you'fe feeling extra generous, a little write up on how you modified it to fit.

Would save me (and others) a lot of R&D time. I'm certainly not asking for it to be done for me, but every bit helps :)

Thanks in advance to all you experts in the know.

Here's a couple of pages which got me wanting one:

http://trx850.motomaniac.net/forum/view ... hilit=seat

http://trx850.motomaniac.net/forum/view ... it=r1+seat

Re: r1 tail / seat unit conversion need pic`s @ info

Posted: Thu Aug 28, 2008 11:31 am
by Quan-Time
umm.. does this help ? 2002 R1 tail. Tail light has indicators built into it so its all clean. Its changed a bit (internally) since then to make way for a few secret parts + it was only a prototype to see if it would fit. send me a PM if you want a detailed bit on it.. Else i can post up here when i get the time.
Oh, and i live in Radelaide :)

Image
Image
Image
Image
Image
Image
Image

Re: r1 tail / seat unit conversion need pic`s @ info

Posted: Thu Aug 28, 2008 12:26 pm
by Kayla
Personally, and this is just my personal subjective opinion mind, yours may vary, I don't think the R1 seat looks right on the TRX (generally). I think (personally and subjectively, mind) that an early v-twin TZ250 seat unit would look nicer, and more in keeping with the shape of the standard seat unit (and it'd flow nicely with the line of the tank).

Kayla

Any opinion offered in this post is purely the personal subjective opinion of the poster. No offense is intended. Any similarity between previous opinions, either living or dead, is purely coincidental.

Re: r1 tail / seat unit conversion need pic`s @ info

Posted: Thu Aug 28, 2008 1:08 pm
by steve speed
well there are talkers and do ers ,,,,so lets see how you do !!cant wait !

Re: r1 tail / seat unit conversion need pic`s @ info

Posted: Thu Aug 28, 2008 1:23 pm
by Kayla
steve speed wrote:well there are talkers and do ers ,,,,so lets see how you do !!cant wait !
Me neither! :D

Re: r1 tail / seat unit conversion need pic`s @ info

Posted: Thu Aug 28, 2008 7:12 pm
by slow codger
:twisted: Female non talker, never

Dave E

Re: r1 tail / seat unit conversion need pic`s @ info

Posted: Mon Sep 01, 2008 7:42 am
by Quan-Time
Kayla wrote:Personally, and this is just my personal subjective opinion mind, yours may vary, I don't think the R1 seat looks right on the TRX (generally). I think (personally and subjectively, mind) that an early v-twin TZ250 seat unit would look nicer, and more in keeping with the shape of the standard seat unit (and it'd flow nicely with the line of the tank).

Kayla

Any opinion offered in this post is purely the personal subjective opinion of the poster. No offense is intended. Any similarity between previous opinions, either living or dead, is purely coincidental.
Wow, could you be any more passive ?

Heh, its ok to have an opinion, and i dont care if you say my bike is crap / looks shitty / whatever. I wont ever take it personally. This is the internet where you cant see me smirking / being sarcastic with most of my posts, and vice-versa.

As for the look of the R1 tail / seat. Yes, i do agree it looks out of place, but only to the tank. If the tank was different it would match up better. But thats what i like about the trx, the huge ass tank and the trellis frame + engine. It makes it unique. Ill be damned if im changing those. So ill make do.
I will say the R1 seat is WAY more comfy tho.. Oh, mine is HUGELY lower aswell over stock. Its very deceptive, but you sit a good 30mm lower. I can stand flat foot with my bum off the seat now.

Re: r1 tail / seat unit conversion need pic`s @ info

Posted: Mon Sep 01, 2008 9:09 am
by bobtrx
Quan your bike is crap :lol: it needs a honda arse end and you need to get to the GP with us girls

Re: r1 tail / seat unit conversion need pic`s @ info

Posted: Mon Sep 01, 2008 10:03 am
by steve speed
yes quan your bike is crap,,, :^o :^o :^o :^o that's why when i saw it i ripped off some of your ideas :D :D ,i to would like a crappy looking bike like yours :D and its taken three years and too much money to get evan close

Re: r1 tail / seat unit conversion need pic`s @ info

Posted: Mon Sep 01, 2008 12:44 pm
by Kayla
Quan-Time wrote:
Kayla wrote:Personally, and this is just my personal subjective opinion mind, yours may vary, I don't think the R1 seat looks right on the TRX (generally). I think (personally and subjectively, mind) that an early v-twin TZ250 seat unit would look nicer, and more in keeping with the shape of the standard seat unit (and it'd flow nicely with the line of the tank).

Kayla

Any opinion offered in this post is purely the personal subjective opinion of the poster. No offense is intended. Any similarity between previous opinions, either living or dead, is purely coincidental.
Wow, could you be any more passive ?

Heh, its ok to have an opinion, and i dont care if you say my bike is crap / looks shitty / whatever. I wont ever take it personally. This is the internet where you cant see me smirking / being sarcastic with most of my posts, and vice-versa.

As for the look of the R1 tail / seat. Yes, i do agree it looks out of place, but only to the tank. If the tank was different it would match up better. But thats what i like about the trx, the huge ass tank and the trellis frame + engine. It makes it unique. Ill be damned if im changing those. So ill make do.
I will say the R1 seat is WAY more comfy tho.. Oh, mine is HUGELY lower aswell over stock. Its very deceptive, but you sit a good 30mm lower. I can stand flat foot with my bum off the seat now.
Ha ha, I don't mean your bike looked crap, I meant that I didn't think (personally and subjectively) that the R1 seat units used by non-specific people on non-specific TRXs didn't look right (according to my subjective, personal opinion). Personally (and possibly even subjectively), I prefer the squarish shape of the standard seat unit or an early 90s TZ jobbie. But then I think that Wayne Rainey's 1992 YZR looks miles better than Rossi's 2008 M1.
Personal and subjective, innit?