Exup swingarm
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
- Site Sponsor
- Posts: 383
- Joined: Wed Aug 11, 2010 10:50 pm
Exup swingarm
I like the look of exup swingarms anybody know if they fit a TRX?
- jpe70
- TRX-Enthusiast
- Posts: 222
- Joined: Tue Dec 27, 2016 3:03 pm
- Location: At The Twin Workshop
- Contact:
Re: Exup swingarm
EXUP? EXUP is an exhaust valve on a lot of Yamaha's including FZR's, ThunderAce & R1's...
- drix
- Site Sponsor
- Posts: 555
- Joined: Wed Apr 16, 2008 9:25 pm
- Location: London/Surrey - UK & Valenciennes - FR
Re: Exup swingarm
Presuming fzr1000 or smth like that? Seen that mod on a Trx a while back... seemed to fit ok but not sure work it implied.
- jpe70
- TRX-Enthusiast
- Posts: 222
- Joined: Tue Dec 27, 2016 3:03 pm
- Location: At The Twin Workshop
- Contact:
Re: Exup swingarm
If we are to presume... Then the ThunderAce swing arm fits right in.
- HolerTogni
- Site Sponsor
- Posts: 703
- Joined: Thu Aug 24, 2006 3:14 pm
- Location: Germany - Munich
- Contact:
Re: Exup swingarm
Hi jjmoto!
My Racetrack-TRiXie got a swingarm of a FZR 1000 like in this picture:
http://images.moto.it/images/1637871/10 ... 595851.jpg
The decal on the rear of the bike says "EXUP" ...
The swingarm fits, is lighter than the original one and more stable.
Since a friend of mine built mx Racetrack-TRiXie, I cannot say how much work it is adapting it. But iirc, it is not a straight swap, but it should not be that much effort.
Swinging greets from Munich!
My Racetrack-TRiXie got a swingarm of a FZR 1000 like in this picture:
http://images.moto.it/images/1637871/10 ... 595851.jpg
The decal on the rear of the bike says "EXUP" ...
The swingarm fits, is lighter than the original one and more stable.
Since a friend of mine built mx Racetrack-TRiXie, I cannot say how much work it is adapting it. But iirc, it is not a straight swap, but it should not be that much effort.
Swinging greets from Munich!
-
- Site Sponsor
- Posts: 383
- Joined: Wed Aug 11, 2010 10:50 pm
Re: Exup swingarm
Yup that's the one just thought it would look good & I want to get a 5.5 rear wheel anyway
- Tarwetijger
- TRX-Enthusiast
- Posts: 1537
- Joined: Tue May 15, 2007 9:31 am
- Location: Netherlands, Assen
- Contact:
Re: Exup swingarm
YZF750 swingarm fits straight in and comes with a 5.5 inch rim too.
- Tarwetijger
- TRX-Enthusiast
- Posts: 1537
- Joined: Tue May 15, 2007 9:31 am
- Location: Netherlands, Assen
- Contact:
Re: Exup swingarm
A YZF750 swingarm fits straight in and comes with a 5.5 inch rim too.
But:
http://www.trx850.com/phpBB_forum/viewt ... f=6&t=4941
But:
http://www.trx850.com/phpBB_forum/viewt ... f=6&t=4941