anyone go down this avenue before?
modifying a pair of rear sets given to me.
given I am 6ft with longish legs.......will it be OK if I go 32mm back and 25mm higher than standard footrest position.
it is for racing.....not road
your input will be appreciated
homemade reaersets
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
Racer-unk
- TRX-Enthusiast
- Posts: 286
- Joined: Fri Mar 03, 2017 5:28 am
- Location: Port Elizabeth, South Africa
-
cobbadiggabuddyblooo
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: homemade reaersets
Some aftermarket rearsets I've seen including the Coerce I have average 25 up/ 25 back. But in saying that I have another plate that takes them to 50/60 which is a little extreme as I'm 6 foot tall myself too. You'll be fine with 25up/32back but it will work your quads a little more... 
laughter is the best medicine
-
Racer-unk
- TRX-Enthusiast
- Posts: 286
- Joined: Fri Mar 03, 2017 5:28 am
- Location: Port Elizabeth, South Africa
Re: homemade reaersets
thanks Cobba
i am limited with space due to steep angle of exhaust. (Already wrapped with "fake" asbestos cloth due to stuffing up a set of boots).
Will try what i've got and can make new plate if it's not OK.
i am limited with space due to steep angle of exhaust. (Already wrapped with "fake" asbestos cloth due to stuffing up a set of boots).
Will try what i've got and can make new plate if it's not OK.