Fitting R6 Front Brake Calipers
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
- TRX-Enthusiast
- Posts: 65
- Joined: Sun Aug 28, 2016 10:34 pm
Fitting R6 Front Brake Calipers
Hi guys. I'm about to hit the button on a pair of R6 (2002) front brake calipers and master cylinder - I know that this is a recognised upgrade for the TRX but can someone confirm that it's a straightforward 'bolt on' upgrade
- dicky
- Site Sponsor / Administrator
- Posts: 1053
- Joined: Thu Jan 06, 2005 11:26 am
- Location: Ruffy, Victoria.
Re: Fitting R6 Front Brake Calipers
Confirmed.
All non-radial calipers from R1 & R6 bolt straight on.
You should use use the R1 or R6 brake master cylinder as well, this gives the correct 'feel'.
All non-radial calipers from R1 & R6 bolt straight on.
You should use use the R1 or R6 brake master cylinder as well, this gives the correct 'feel'.
dicky
OOOSDC #5
OOOSDC #5
- Con Rod
- Site Sponsor
- Posts: 1126
- Joined: Wed Nov 16, 2011 11:48 pm
- Location: Sydney, Australia
Re: Fitting R6 Front Brake Calipers
there is some re-routing of the brake lines, but you can make the stock lines work fine
Paul
-
- TRX-Enthusiast
- Posts: 65
- Joined: Sun Aug 28, 2016 10:34 pm
Re: Fitting R6 Front Brake Calipers
Many thanks for the info chaps - I'm using the R6 master cylinder too. Parts are now on their way