Yamaha TRX850 Enthusiasts Forum

Hello guys ,
here in this topic , I will try to tell you about everything that I've done on this motorcycle........"
so this is the bike when I buy from Germany:








.............. since 10.2015........ after a little rest in Garage TRX enter in My workshop

.......... and the story began on 06.02.2016


......... 2 hours after that.........


and another 2 hours............I already had a ready basis for my project:


Work in progress

New Coils:




and new radiator YZF R6 2006-2015




rear shock YZF R6 2008 and issue of the montage...........








new exhaust system............

Looking very promising - keep posting! What overall look are you going for and what rear end will you use?

I'm also very curious what your plans are with this project, but it looks promising.

........... Let me show you photos which are for a later stage of my story -> ок only one spy pic overall line design:







in the Final picture of my project have parts from following bike's
Yamaha TRX850
Yamaha TDM850 3VD
Yamaha R6 '07
Yamaha R6 '08
Yamaha V-Max 1200
CBR1000RR '08
DUCATI Panigale 1199
Yamaha MT-03
Kawasaki ZR-350
.................... and many special and custom parts:
Many Carbon Parts ( soon will show you all of them ) , ACCOSSATO Control equipment , Scots OHLINS
ARROW End Can - Special Custom Order ( the ARROW Factory is in one near city )

I like where this is travelling !
..... and I thought I had overengineered my shock mount !!!
One question, what denso coils did you use ?

Looking great, keep the updates coming!

This is the one posted on Facebook
yes, very promising!

Bob

Ignition coils coming from HONDA CBR 600RR 2005-06 model with wiring harness and when you remove Fork and Radiator - this is 1 hour work to install


- Easy , Fast and really good mod with nice result

about the Shock............... this shock cost me 4 days , but I have success and put 2008 R6 Shock in to the 2007 R6 swingarm and 98 TRX850























Original Linkage from TRX and adjustable ride height links for R6:





........ and exhaust header






............ so in last 3 days working on to the - detachable rear subframe

Not being picky but the shock linkage looks to be all pulling in a straight line? (if that made sense)

Richy wrote:Not being picky but the shock linkage looks to be all pulling in a straight line? (if that made sense)

.......... yep if some body can pull it from the back side - Yes in other case Swingarm moving Up - Down so the links pull linkage in Direction - "Up" and the Rear Shock - push it back and you just looking in wrong line of direction

Ignition coils coming from HONDA CBR 600RR 2005-06 model with wiring harness

can you let me know the coil part numbers and primary resistance?

Thanks

I dont know part number - if you wish you can reach in: http://www.megazip.ru/zapchasti-dlya-motocyklov/honda
full part manuals for ANY Bike and I use this web when order spare parts in service

............ soon I will be ready with the subframe and will post the pics of this small and beautiful work of art it took me 1 week

Denso 129700-4510 (1.4 Ohm) are you running with std ECU and putting some resistors in series?

That's what I was going to do if I can't (I haven't yet) found some 4 Ohm ones.