I don't have a std set of Mikuni carbies here at present but I have to do a little work on a pair shortly.
Does anyone know the size of the std Mikuni carby bowl retaining screws???
The Phillips head screws can be a right pain in the arse if they are locked in tight.
Same as I'd done earlier with the manifold clamp screws, I want to convert these to cap heads .
Std Mikuni Carby bowl screw thread size???
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Std Mikuni Carby bowl screw thread size???
laughter is the best medicine
- Con Rod
- Site Sponsor
- Posts: 1126
- Joined: Wed Nov 16, 2011 11:48 pm
- Location: Sydney, Australia
Re: Std Mikuni Carby bowl screw thread size???
m5 *10 or m5 *15, either are good
same for the diaphragm cover
same for the diaphragm cover
Paul
-
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: Std Mikuni Carby bowl screw thread size???
Thanks Paul,
Is that with a 0.75 pitch??
Is that with a 0.75 pitch??
laughter is the best medicine
- Con Rod
- Site Sponsor
- Posts: 1126
- Joined: Wed Nov 16, 2011 11:48 pm
- Location: Sydney, Australia
-
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: Std Mikuni Carby bowl screw thread size???
Cool bananas
Thanks Paul
Thanks Paul
laughter is the best medicine