New rear end / seat unit ideas?
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
- TRX-Enthusiast
- Posts: 8
- Joined: Sun Aug 04, 2013 7:56 pm
New rear end / seat unit ideas?
I want to update my TRX's rear end / seat unit and have seen some nice jobs done.
Question is what rears can go on the TRX and what amount of frame needs chopping?
I am quite good with spanners and a angle grinder btw!
Any help would be good?
Question is what rears can go on the TRX and what amount of frame needs chopping?
I am quite good with spanners and a angle grinder btw!
Any help would be good?
-
- TRX-Enthusiast
- Posts: 42
- Joined: Thu Aug 16, 2012 7:20 pm
Re: New rear end / seat unit ideas?
I'm in the middle of putting a cafe race seat on mine and Ive altered the frame,and I'm just about to get it painted,I'll send you some pics to give you some ideas if you want,just send me your email,not sure how to post pics on this site
-
- TRX-Enthusiast
- Posts: 5
- Joined: Mon Feb 16, 2015 2:41 am
- Location: Perth
Re: New rear end / seat unit ideas?
I bought mine a few weeks ago with this one on it.
Think there was a little bit of frame cutting required though.
Think there was a little bit of frame cutting required though.
-
- TRX-Enthusiast
- Posts: 34
- Joined: Thu Jul 01, 2010 3:18 pm
- Location: Hahndorf Adelaide Hills South Australia
Re: New rear end / seat unit ideas?
Here's one I prepared earlier......
Just needs painting now. Have more pics if you wanna look.
Just needs painting now. Have more pics if you wanna look.
You do not have the required permissions to view the files attached to this post.
-
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: New rear end / seat unit ideas?
http://www.trx850.com/phpBB_forum/viewt ... 250#p96280
This tail I use for trackdays is from a Honda 250 fits on with no frame mods
This tail I use for trackdays is from a Honda 250 fits on with no frame mods
laughter is the best medicine
- Wombat
- Forum Marsupial
- Posts: 1092
- Joined: Fri Jan 07, 2005 10:50 am
- Location: Carlingford, Sydney, Australia
Re: New rear end / seat unit ideas?
I'm thinking of getting one of those J-Parts single seat conversions with the little glove box in the top.
No modifications and can use the OEM seat pad and tail light
Exactly the same as THE SIMPLE one
Bob
No modifications and can use the OEM seat pad and tail light
Exactly the same as THE SIMPLE one
Bob
"The fire is almost out......and there's nothing left to burn!"
- PrfctChaos
- TRX-Enthusiast
- Posts: 73
- Joined: Wed Nov 06, 2013 2:54 am
- Location: Perth, Australia
Re: New rear end / seat unit ideas?
I used this one of a street triple. Needs a little bit of chopping, underseat fairing is lasercut 2 mm aluminium.
You do not have the required permissions to view the files attached to this post.
1996 TRX, Front end from a 2006 GSXR 750, Seat off a 2012 Triumph street triple. TDMR carbs, Laser cans, Perreli Rosso Supercorsas.