What's next on my TRX.......
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: What's next on my TRX.......
To answer your question Dicky...
Once you made me aware and a little research...No...
But paid $1 for the oil cooler before getting an understanding on the principals, so no real loss.
Was only a matter of drilling and taping a thread into the rear of the sump to mount the oil temp sender that came with the Koso dash so no real outlay and only proved what you pointed out.
Once you made me aware and a little research...No...
But paid $1 for the oil cooler before getting an understanding on the principals, so no real loss.
Was only a matter of drilling and taping a thread into the rear of the sump to mount the oil temp sender that came with the Koso dash so no real outlay and only proved what you pointed out.
laughter is the best medicine
-
- Site Sponsor
- Posts: 143
- Joined: Wed Jul 24, 2013 12:53 am
- Location: Newcastle-upon-Tyne
Re: What's next on my TRX.......
Cheers for the feed back guys, the only reason why the rad leaked is with it being an r6 rad it had an extra pipe on the bottom left and two smaller nozzles top right so I gave it to a welder to block them up, unfortunately it leaked through the weld. And I am not sure where it came from, but got it in a good deal with a load of engine parts I was after. So to be honest I couldn't say no to it, it's been sitting in the garage for about 12 months !!!.... But original rad is in a bit of a mess, and I felt it was time to change the coolant.
I've been running without a fan for quite a while now, to make sure, but previously I've never had any issues myself with overheating, and the fan rarely ever kicks in. So think i may not even bother with a fan, but will see how thing go for now
I've been running without a fan for quite a while now, to make sure, but previously I've never had any issues myself with overheating, and the fan rarely ever kicks in. So think i may not even bother with a fan, but will see how thing go for now
- wreckage
- Site Sponsor
- Posts: 372
- Joined: Sat Sep 27, 2014 4:59 am
- Location: Brisbane, Australia
Re: What's next on my TRX.......
Wow.. Your bike looks really nice, phil108.
A bit of orange on the fairing and it'd be perfect!
A bit of orange on the fairing and it'd be perfect!
Wherever you go, there you are.
-
- Site Sponsor
- Posts: 143
- Joined: Wed Jul 24, 2013 12:53 am
- Location: Newcastle-upon-Tyne
- dicky
- Site Sponsor / Administrator
- Posts: 1053
- Joined: Thu Jan 06, 2005 11:26 am
- Location: Ruffy, Victoria.
-
- Site Sponsor
- Posts: 143
- Joined: Wed Jul 24, 2013 12:53 am
- Location: Newcastle-upon-Tyne
- Con Rod
- Site Sponsor
- Posts: 1126
- Joined: Wed Nov 16, 2011 11:48 pm
- Location: Sydney, Australia
Re: What's next on my TRX.......
thats nice and tidy, with a bit of paint it will look spiff
as you can weld, it is probably worthwhile reinforcing the bracket for the pillion pegs/exhaust hangers
there are a bit of a week spot and have broken off on a few TRXs, as seen here
http://www.trx850.com/phpBB_forum/viewt ... 4&start=75
as you can weld, it is probably worthwhile reinforcing the bracket for the pillion pegs/exhaust hangers
there are a bit of a week spot and have broken off on a few TRXs, as seen here
http://www.trx850.com/phpBB_forum/viewt ... 4&start=75
Paul
-
- Site Sponsor
- Posts: 143
- Joined: Wed Jul 24, 2013 12:53 am
- Location: Newcastle-upon-Tyne
Re: What's next on my TRX.......
Con Rod wrote:thats nice and tidy, with a bit of paint it will look spiff
as you can weld, it is probably worthwhile reinforcing the bracket for the pillion pegs/exhaust hangers
there are a bit of a week spot and have broken off on a few TRXs, as seen here
http://www.trx850.com/phpBB_forum/viewt ... 4&start=75
Actually I can't weld!!!! It's made of a Rentec grab rail turned upside-down and aluminium rods drilled, bent and threaded where needed. Tbh it's a bodge of whatever I had in the man cave
-
- Site Sponsor
- Posts: 1211
- Joined: Fri Jan 21, 2011 12:30 am
Re: What's next on my TRX.......
I am doing exactly the same on my bike! I was considering box section alluminium, never thought about just bending some rod!
nice one!
nice one!