What's next on my TRX.......
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
- Site Sponsor
- Posts: 143
- Joined: Wed Jul 24, 2013 12:53 am
- Location: Newcastle-upon-Tyne
-
- Site Sponsor
- Posts: 2149
- Joined: Sat Apr 02, 2011 10:36 pm
- Location: brisbane AUSTRALIA
Re: What's next on my TRX.......
Grinding will be easier if you first remove the fold out foot rest first, won't take as long as well.
Otherwise , have you thought of the little tie knobs on the underside of the rear frame....they are looking a bit Daggy ?
Otherwise , have you thought of the little tie knobs on the underside of the rear frame....they are looking a bit Daggy ?
-
- Site Sponsor
- Posts: 143
- Joined: Wed Jul 24, 2013 12:53 am
- Location: Newcastle-upon-Tyne
Re: What's next on my TRX.......
Hi Alex, yeah I did strip left side peg down and ground it down on a vice, didn't get chance to do other one only cause of kids, and I they unfortunately they needed feeding and putting to bed
Was going to do other side today but chucking down up here, not sure which bit you refering to that daggy tho?
Was going to do other side today but chucking down up here, not sure which bit you refering to that daggy tho?
-
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: What's next on my TRX.......
Sold a pair ground back only a few weeks ago and polished up really nice too for a good look plus no problem with strength.
Seen a few flimsy brackets made but ultimately don't hold the weight and vibes of the heavier cans.
Seen a few flimsy brackets made but ultimately don't hold the weight and vibes of the heavier cans.
laughter is the best medicine
-
- Site Sponsor
- Posts: 143
- Joined: Wed Jul 24, 2013 12:53 am
- Location: Newcastle-upon-Tyne
Re: What's next on my TRX.......
Yeah agreed. After chatting to Kayla, who use to make them, she mentioned that there were some problems with them. Couldn't find anything else on the net tho
-
- Site Sponsor
- Posts: 2149
- Joined: Sat Apr 02, 2011 10:36 pm
- Location: brisbane AUSTRALIA
Re: What's next on my TRX.......
Good to hear you are putting the little ones first, the daggy things I was looking to are the little knobs sitting under the frame rails next to your exhaust ....kind a like nipples on a bull, the don't do much ..phil108 wrote:Hi Alex, yeah I did strip left side peg down and ground it down on a vice, didn't get chance to do other one only cause of kids, and I they unfortunately they needed feeding and putting to bed
Was going to do other side today but chucking down up here, not sure which bit you refering to that daggy tho?
Cobba is on the money with a good an strong bracket too, done mine the same.
-
- Site Sponsor
- Posts: 143
- Joined: Wed Jul 24, 2013 12:53 am
- Location: Newcastle-upon-Tyne
- SDN
- Site Sponsor
- Posts: 760
- Joined: Sat Jan 23, 2010 2:26 pm
- Location: Birmingham
Re: What's next on my TRX.......
Looking good - BTW what fairing are you using?
-
- Site Sponsor
- Posts: 143
- Joined: Wed Jul 24, 2013 12:53 am
- Location: Newcastle-upon-Tyne
Re: What's next on my TRX.......
Hi thanks, fairing is original but have fitted (cough) Honda vfr (cough) headlights to it. I wasn't a fan of the TRX headlight and the cafe racer and it just didn't suit me.
-
- Site Sponsor
- Posts: 143
- Joined: Wed Jul 24, 2013 12:53 am
- Location: Newcastle-upon-Tyne
-
- Site Sponsor
- Posts: 143
- Joined: Wed Jul 24, 2013 12:53 am
- Location: Newcastle-upon-Tyne
-
- Site Sponsor
- Posts: 143
- Joined: Wed Jul 24, 2013 12:53 am
- Location: Newcastle-upon-Tyne
-
- Site Sponsor
- Posts: 143
- Joined: Wed Jul 24, 2013 12:53 am
- Location: Newcastle-upon-Tyne
-
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: What's next on my TRX.......
I'm liking the look of this Phil.. Can't wait to see it all finished .. come on tomorrow...
laughter is the best medicine
- Killerwhale
- Site Sponsor
- Posts: 3797
- Joined: Tue Aug 22, 2006 8:41 am
- Location: GBG/Sweden
- Contact:
Re: What's next on my TRX.......
Yup, me likey 2cobbadiggabuddyblooo wrote:I'm liking the look of this Phil.. Can't wait to see it all finished .. come on tomorrow...