Sorry if this is going over old ground, i did a search but i'm still unsure.
I have a YZF750 front end going on my bike. At the moment it has an R1 top yoke. Looking at the ign switch mounting, it looks as if the TRX switch will not be a straight fit. Does the TRX switch fit the YZF yoke? I'm not too worried if the steering lock works or not.
YZF/R1 top yoke ign switch.
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
cycloneranger
- Site Sponsor
- Posts: 115
- Joined: Tue Apr 10, 2012 8:10 pm
- Location: Southampton
YZF/R1 top yoke ign switch.
Keep calm and topp up the oil
-
alextrx850
- Site Sponsor
- Posts: 2149
- Joined: Sat Apr 02, 2011 10:36 pm
- Location: brisbane AUSTRALIA
Re: YZF/R1 top yoke ign switch.
Yes, the TRX ignition switch will fit into the YZF top yolk...you will need to cut a small piece off the steering lock bracket on the steering head as well as the switch lower will foul...
-
cycloneranger
- Site Sponsor
- Posts: 115
- Joined: Tue Apr 10, 2012 8:10 pm
- Location: Southampton
