Second Nojima hand bent system in Australia installed.

Please share your secrets! What mods have you made to your TRX?

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
Trixed
TRX-Enthusiast
Posts: 341
Joined: Sat Jan 26, 2013 4:07 am
Location: Brisbane Aus

Second Nojima hand bent system in Australia installed.

Post by Trixed » Sat Nov 09, 2013 12:49 pm

Putting some final touches and just finished handcrafting some carbon spacers. Can't wait to ride tomorrow. Rubbing my hands. Can't sleep! =P~
It is time to rev your hearts!

alextrx850
Site Sponsor
Posts: 2149
Joined: Sat Apr 02, 2011 10:36 pm
Location: brisbane AUSTRALIA

Re: Second Nojima hand bent system in Australia installed.

Post by alextrx850 » Sat Nov 09, 2013 8:51 pm

Another Nojima ?.. :shock:
Never heard of this brand before,and now they are everywhere.

Trixed
TRX-Enthusiast
Posts: 341
Joined: Sat Jan 26, 2013 4:07 am
Location: Brisbane Aus

Re: Second Nojima hand bent system in Australia installed.

Post by Trixed » Sat Nov 09, 2013 9:40 pm

Over the last two days I had the pleasure of fitting three different systems yoshimura, over racing and nojima. Nojima full system was by far the winner based on flow of gases, sound and overall Appeal.
Will post a video later.
It is time to rev your hearts!

alextrx850
Site Sponsor
Posts: 2149
Joined: Sat Apr 02, 2011 10:36 pm
Location: brisbane AUSTRALIA

Re: Second Nojima hand bent system in Australia installed.

Post by alextrx850 » Sat Nov 09, 2013 10:00 pm

Aha,..you've been to Canungera then. =D>

User avatar
ricr378
TRX-Enthusiast
Posts: 136
Joined: Thu Jul 07, 2011 10:04 am
Location: Canungra, Queensland

Re: Second Nojima hand bent system in Australia installed.

Post by ricr378 » Sun Nov 10, 2013 12:36 am

not mine. where did you get it from?

Trixed
TRX-Enthusiast
Posts: 341
Joined: Sat Jan 26, 2013 4:07 am
Location: Brisbane Aus

Re: Second Nojima hand bent system in Australia installed.

Post by Trixed » Sun Nov 10, 2013 1:36 am

At a garage sale $150. Great bloke. Loves trexes.
It is time to rev your hearts!

User avatar
fung
Site Sponsor
Posts: 1605
Joined: Mon Aug 23, 2010 2:00 am
Location: Gold Coast. South East Queensland.

Re: Second Nojima hand bent system in Australia installed.

Post by fung » Sun Nov 10, 2013 1:45 am

C'Mon trixed.....
'this thread is useless without pics' etc etc etc........
I WOULD RATHER WEAR OUT THAN RUST

Trixed
TRX-Enthusiast
Posts: 341
Joined: Sat Jan 26, 2013 4:07 am
Location: Brisbane Aus

Re: Second Nojima hand bent system in Australia installed.

Post by Trixed » Sun Nov 10, 2013 3:58 am

It is time to rev your hearts!

alextrx850
Site Sponsor
Posts: 2149
Joined: Sat Apr 02, 2011 10:36 pm
Location: brisbane AUSTRALIA

Re: Second Nojima hand bent system in Australia installed.

Post by alextrx850 » Sun Nov 10, 2013 7:27 am

What a find...AGAIN... :shock:
Shows what a bloke with minimal HAIR can do. :lol:

Went for a ride about Mt Tamborine today with a workmate on his 07 R1 ..good fun, but the forecasted thunder storm caught us both on the way home, so spent 30 or so mins in torrential rain and HAIL...that's a first..switched my Go Pro on and love the footage...lightning strikes and all.
We sure need the rain.

Trixed
TRX-Enthusiast
Posts: 341
Joined: Sat Jan 26, 2013 4:07 am
Location: Brisbane Aus

Re: Second Nojima hand bent system in Australia installed.

Post by Trixed » Sun Nov 10, 2013 8:29 am

Am at stapylton after the rain dried. Blasting through the cane fields with the mind blowing pipes at the back!

There is a marked increase in power, even on stock jetting and have noticed engine runs slightly cooler on the temp gauge. Above 4k revs the engine feels really smooth and no harshness whatsoever. Recently cleaned, re-kitted and balanced the carbys. So KNN filter and the Nojima seem to work really well. The engine breathes a lot better with no misfire at all. Very happy with the change.
It is time to rev your hearts!

User avatar
emway
TRX-Enthusiast
Posts: 65
Joined: Sat Apr 30, 2011 12:55 pm
Location: Heerhugowaard, Noord-Holland

Re: Second Nojima hand bent system in Australia installed.

Post by emway » Tue Nov 12, 2013 11:06 am

Nice sound, saw the video. You also will not bother anyone with that sound right there. That is quite different here in Holland. Nice landscape
Image

Trixed
TRX-Enthusiast
Posts: 341
Joined: Sat Jan 26, 2013 4:07 am
Location: Brisbane Aus

Re: Second Nojima hand bent system in Australia installed.

Post by Trixed » Mon Dec 02, 2013 2:09 pm

emway wrote:Nice sound, saw the video. You also will not bother anyone with that sound right there. That is quite different here in Holland. Nice landscape
Yes lucky here with the sound. Mind you it is a beautiful sound at that! :P
It is time to rev your hearts!

Post Reply