Page 1 of 1
help needed. IS this nirmal or bent ?
Posted: Sun Mar 30, 2008 7:36 pm
by col
can anyone tell me if this is normal or bent.
my trx went over on its L/H side.
I've stripped the bodywork but noticed that the frame on the R/H side is different to the L/H side.
where the lower fairing support rods come out from the bottom frame rail.
On mine the R/H lower frame rail sticks out further than the L/H rail.
I would appreciate if some one could look at theirs to se if they are the same as mine or not.
have a look at the pics, you can se the rail on the R/H side(left in the pic) but not on the L/H side.(right in the pic)
here the lower rail is obviously wider than the top
in this pic it looks like its pretty much directly beneath it.
Re: help needed. IS this nirmal or bent ?
Posted: Sun Mar 30, 2008 7:44 pm
by phuk72
The frame is not symetrcial - all looks fine there (other than the dodgy anodised tax disc holder
_
Re: help needed. IS this nirmal or bent ?
Posted: Sun Mar 30, 2008 7:49 pm
by youngy
that's the way it should be Col
Re: help needed. IS this nirmal or bent ?
Posted: Sun Mar 30, 2008 8:58 pm
by steve speed
just checked mine its the same
Re: help needed. IS this nirmal or bent ?
Posted: Mon Mar 31, 2008 9:12 pm
by idl1975
steve speed wrote:just checked mine its the same
What, THREE dodgy anodised tax-disc holders?!
The mind boggles...
Re: help needed. IS this nirmal or bent ?
Posted: Mon Mar 31, 2008 10:12 pm
by col
it was on it when i get it,blimey picky picky picky
Re: help needed. IS this nirmal or bent ?
Posted: Tue Apr 01, 2008 6:24 am
by idl1975
col wrote:it was on it when i get it,blimey picky picky picky
At least it looks waterproof, unlike my cheap black plastic one.
Re: help needed. IS this nirmal or bent ?
Posted: Wed Apr 02, 2008 6:05 pm
by brockzila
pull it off and chuck it. you wont need that back in godzone.
Re: help needed. IS this nirmal or bent ?
Posted: Wed Apr 02, 2008 7:03 pm
by col
I believe the wof is a bit stricter than our mot though
Re: help needed. IS this nirmal or bent ?
Posted: Wed Apr 02, 2008 9:09 pm
by Tarwetijger
So, how come you ride trough a shower of... milk?
Re: help needed. IS this nirmal or bent ?
Posted: Wed Apr 02, 2008 11:56 pm
by col
Its just dirty water from the side of the road when the bike fell off the trailer
Re: help needed. IS this nirmal or bent ?
Posted: Thu Apr 03, 2008 8:14 am
by Tarwetijger
col wrote:Its just dirty water from the side of the road when the bike fell off the trailer
Oh... so it's not funny at all. Sorry
Re: help needed. IS this nirmal or bent ?
Posted: Thu Apr 03, 2008 4:45 pm
by brockzila
yeah from what i can tell. its every 6mo and is a full top to toe check of all faccets. . also jet wash the sucker to the edge of its life. it may stop the costoms guys fumagating it befor they let it in the door.