Arriving to the party late...
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
- TRX-Enthusiast
- Posts: 3
- Joined: Mon Jan 15, 2018 12:27 pm
Arriving to the party late...
G'day All,
I'm from the Nanny State best know as Melbourne. I purchased my TRX about 6months ago. She'd been in an accident so I picked her up pretty cheap. I'm trying to restore her back to original.
Whilst the plastics were difficult to source, I have collected a full set in relatively good condition. Now I'm not far off from getting her repainted.
My current conundrum is Stickers/Decals. I've almost got the OEM Part numbers figured out... however, like the plastics, there aren't many around...
Does anyone here know of someone who does aftermarket decals for the TRX?
-Including the elusive part# 4UN-2173E-00 (the Side Cover Graphic seen on the Red/Black TRX above).
Any help would be much appreciated.
Thanks in advance!
I'm from the Nanny State best know as Melbourne. I purchased my TRX about 6months ago. She'd been in an accident so I picked her up pretty cheap. I'm trying to restore her back to original.
Whilst the plastics were difficult to source, I have collected a full set in relatively good condition. Now I'm not far off from getting her repainted.
My current conundrum is Stickers/Decals. I've almost got the OEM Part numbers figured out... however, like the plastics, there aren't many around...
Does anyone here know of someone who does aftermarket decals for the TRX?
-Including the elusive part# 4UN-2173E-00 (the Side Cover Graphic seen on the Red/Black TRX above).
Any help would be much appreciated.
Thanks in advance!
- dicky
- Site Sponsor / Administrator
- Posts: 1053
- Joined: Thu Jan 06, 2005 11:26 am
- Location: Ruffy, Victoria.
Re: Arriving to the party late...
I bought a complete set a few years back from e-bay.
Vendor was based in Birmingham, trading on ebay as Mrs Slocum, but seems like the real name is Dawn Good, operating Goodgraphics.
Doesn't seem to be active on ebay now.
Maybe someone in the UK might have more info.
Vendor was based in Birmingham, trading on ebay as Mrs Slocum, but seems like the real name is Dawn Good, operating Goodgraphics.
Doesn't seem to be active on ebay now.
Maybe someone in the UK might have more info.
dicky
OOOSDC #5
OOOSDC #5
-
- TRX-Enthusiast
- Posts: 3
- Joined: Mon Jan 15, 2018 12:27 pm
Re: Arriving to the party late...
Thank you dicky - I've found an eBay Sale in the UK from the same person Mrs Slocum... Trying to verify if it's still current.
In the meantime - I may have found a complete OEM set. I'll share my findings in the next day or two for anyone else having similar issues.
Thanks again.
In the meantime - I may have found a complete OEM set. I'll share my findings in the next day or two for anyone else having similar issues.
Thanks again.
-
- TRX-Enthusiast
- Posts: 22
- Joined: Sat Aug 05, 2017 4:11 pm
Re: Arriving to the party late...
Not Jeremy who I sold my green bodywork to recently by any chance?
simon
simon
-
- TRX-Enthusiast
- Posts: 3
- Joined: Mon Jan 15, 2018 12:27 pm
Re: Arriving to the party late...
The one and the same! - How you doing mate?gizzo wrote:Not Jeremy who I sold my green bodywork to recently by any chance?
simon
-
- TRX-Enthusiast
- Posts: 22
- Joined: Sat Aug 05, 2017 4:11 pm
Re: Arriving to the party late...
Yeah, good thanks mate. The TReX is going like a champ. Here's a link to my thread with a few pics of the fairing donor if you're interested.
http://www.trx850.com/phpBB_forum/viewt ... 06#p119120
Good luck with the project
s
http://www.trx850.com/phpBB_forum/viewt ... 06#p119120
Good luck with the project
s
-
- TRX-Enthusiast
- Posts: 4
- Joined: Sun Jun 24, 2018 11:39 am
Re: Arriving to the party late...
Hi Gizzo, have you found the replacement decals yet? I am also based in Melbourne and going through the same issue..
- PrfctChaos
- TRX-Enthusiast
- Posts: 73
- Joined: Wed Nov 06, 2013 2:54 am
- Location: Perth, Australia
Re: Arriving to the party late...
Ive printed my own before, then you just give the whole fairing a couple of clear coats afterwards. works like a charm.
Obviously get it professionally printed on sticker paper for a few dollars, not a house printer.
Attached are some decal sheets.
https://www.dropbox.com/s/8w0bga0pl9l6n ... y.jpg?dl=0
https://www.dropbox.com/s/6evk9mvda0rx5 ... y.jpg?dl=0
https://www.dropbox.com/s/g0rv1q6spyezl ... y.jpg?dl=0
Obviously get it professionally printed on sticker paper for a few dollars, not a house printer.
Attached are some decal sheets.
https://www.dropbox.com/s/8w0bga0pl9l6n ... y.jpg?dl=0
https://www.dropbox.com/s/6evk9mvda0rx5 ... y.jpg?dl=0
https://www.dropbox.com/s/g0rv1q6spyezl ... y.jpg?dl=0
1996 TRX, Front end from a 2006 GSXR 750, Seat off a 2012 Triumph street triple. TDMR carbs, Laser cans, Perreli Rosso Supercorsas.