Engine cases
Posted: Sun Mar 19, 2017 6:40 am
Hi
Are trx engine cases interchangeable or are they matching pairs??
Thanks
Are trx engine cases interchangeable or are they matching pairs??
Thanks
Page 1 of 1
Re: Engine cases
Posted: Sun Mar 19, 2017 8:21 am
Interchangeable.
Re: Engine cases
Posted: Mon Mar 20, 2017 7:06 am
interchangeable ....but, the top case has the data required for its corresponding crank bearings engraved on the back/top side. So if you ever require a crank rebuild, you'll be potentially in the shit 
Re: Engine cases
Posted: Mon Mar 20, 2017 10:36 am
Thank god I got a top case then
Re: Engine cases
Posted: Mon Mar 20, 2017 12:19 pm
It's just a simple process of placing the shells into the case that you already have.
If the original case tells you it's green, just place them back in the new case with the crank and plastiguage them to find out if the clearance is within spec.
If ever you remove the crank even with the original cases, you should plastiguage all the crank bearing anyhow. This is one of the major factors in maintaining good healthy oil pressure.
If the original case tells you it's green, just place them back in the new case with the crank and plastiguage them to find out if the clearance is within spec.
If ever you remove the crank even with the original cases, you should plastiguage all the crank bearing anyhow. This is one of the major factors in maintaining good healthy oil pressure.