Page 1 of 2

I needed this one, really

Posted: Sat Sep 24, 2016 9:12 pm
by Tarwetijger
Bought another one today. :D

Image

If only I had my own dyno to compare all the interesting parts:
left vs. right
Mikuni TDMR vs. FCR's
Kent vs. OVER cams
Sanddune valves vs. OVER valves
JE pistons vs. OVER (?) pistons
Carrillo vs. titanium OVER conrods
UPSD & öhlins vs. WP front/rear
Akra headers vs. OVER exhaust system

Plan is to make the left one my daily commuter with an original spare engine.
The right one has to be the track tool. So a combination of all the interesting parts, including the 6 gearbox of course. The Marchesini's I still have will also fit straight in.

Re: I needed this one, really

Posted: Sun Sep 25, 2016 7:40 am
by Tarwetijger
Forgot an important spec: ignitech vs. OVER ecu 8)

Re: I needed this one, really

Posted: Sun Sep 25, 2016 8:13 pm
by Overlord Neil
Cracking bikes (both) where do you find the spec sheet on these beauties? I'd have to have one like this too... and deal with the consequences later! ;)

Re: I needed this one, really

Posted: Sun Sep 25, 2016 8:35 pm
by Tarwetijger
Overlord Neil wrote:Cracking bikes (both) where do you find the spec sheet on these beauties? I'd have to have one like this too... and deal with the consequences later! ;)
More info on the 'old' one is here:
http://www.trx850.com/phpBB_forum/viewt ... =42&t=4391
The 'new' one is not added yet, though.

Re: I needed this one, really

Posted: Sun Sep 25, 2016 9:51 pm
by coxylaad
wow.

the red one looks great

Re: I needed this one, really

Posted: Mon Sep 26, 2016 10:11 am
by Killerwhale
Overlord Neil wrote:Cracking bikes (both) where do you find the spec sheet on these beauties? I'd have to have one like this too... and deal with the consequences later! ;)
Come to Sweden and buy mine :lol:

Re: I needed this one, really

Posted: Mon Sep 26, 2016 10:28 am
by Overlord Neil
At least its black so 'close enough' to get away with swapping mine (as far as the missus could tell)... shhh!

Re: I needed this one, really

Posted: Mon Sep 26, 2016 11:46 pm
by dandywarhol
Where the fcuk do you guys find these rocking horse sh1t goodies :?: :shock:

Re: I needed this one, really

Posted: Tue Sep 27, 2016 5:52 am
by Killerwhale
dandywarhol wrote:Where the fcuk do you guys find these rocking horse sh1t goodies :?: :shock:
For example my R1 fork already adapted for the TRX was bought at evilbay Germany :-)
Not much goodies around anymore though :-(

Re: I needed this one, really

Posted: Tue Sep 27, 2016 7:49 am
by dandywarhol
Killerwhale wrote:
dandywarhol wrote:Where the fcuk do you guys find these rocking horse sh1t goodies :?: :shock:
For example my R1 fork already adapted for the TRX was bought at evilbay Germany :-)
Not much goodies around anymore though :-(
Cheers killer - I'm pretty happy with the Race Tech front and Ohlins rear setup on mine. I just would like to get my hands on the other rocking horse sh1t 8)

Re: I needed this one, really

Posted: Tue Sep 27, 2016 8:30 am
by Killerwhale
Also Germany came thru for my tedium 900 enjun with flatslides....greece for the wiseco high comp pistons Germany tornado cams.. etc etc
Guess right place at the right time....

http://www.moto-twins.de/index.php?cat= ... auten.html

Re: I needed this one, really

Posted: Tue Sep 27, 2016 9:59 am
by cobbadiggabuddyblooo
yep ditto on Germany to find some good buys...

Re: I needed this one, really

Posted: Tue Sep 27, 2016 12:40 pm
by highlander
dandywarhol wrote:Where the fcuk do you guys find these rocking horse sh1t goodies :?: :shock:
Maybe I shouldn't mention that I just got this Akrapovic titanium 2-1 in the UK which is starting to polish up nicely! :oops: :oops:

Image

Re: I needed this one, really

Posted: Tue Sep 27, 2016 11:14 pm
by dandywarhol
Aaaaaaaaaargh :!:

Re: I needed this one, really

Posted: Wed Sep 28, 2016 1:50 am
by alextrx850
Too much pressure on the polisher..
Aprilia end cans are a good source of titanium