Help carb bits needed
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
- TRX-Enthusiast
- Posts: 36
- Joined: Mon Jul 26, 2010 10:27 pm
- Location: Lancs/merseyside border uk
Help carb bits needed
Help I need some carb bits urgently I have stupidly squashed the needle set set 3GM-141 07-17 it's the plastic part in the float bowl in That the needle jet fits in, I will order the part from a Yamaha dealer if it's still available , I am going to France very very soon ,can anyone help sell lend swop bits I am desperate it's a Mz 250 if I can't get the parts HELP!!!!!
IF only one bike was enough.......................(still room for another one)
- Con Rod
- Site Sponsor
- Posts: 1126
- Joined: Wed Nov 16, 2011 11:48 pm
- Location: Sydney, Australia
Re: Help carb bits needed
may not be quick enough for you but this might help
http://www.ebay.com.au/itm/Yamaha-YZF75 ... SwH71XOXCO
http://www.ebay.com.au/itm/Yamaha-YZF75 ... SwH71XOXCO
Paul
-
- TRX-Enthusiast
- Posts: 36
- Joined: Mon Jul 26, 2010 10:27 pm
- Location: Lancs/merseyside border uk
Re: Help carb bits needed
Thanks for the info , I had what I needed in my shed!, fzr exup carbs use the same parts and I had a set of carbs that some spiders had turned into a hotel, after evicting the little buggers I stripped one of the carbs and hey presto full power is resumed ... I would have had to go on stinky my Mz it's nice but sloooooooow
IF only one bike was enough.......................(still room for another one)